Jump to content
SAU Community

Recommended Posts

ok guys, after searching pretty much all over the net i cannot find for the life of me a decent site apart from the gran turismo site that people have their best lap times.

not only that but the world records are only a sec apart between 1 and 50 and they are all using a wheel, i use a controller.

i dont have my info in front of me but if you are interested, fill in the following.

i think we should keep this interesting and have the following times with:

all aids off except abs on 1

and track grip on real

i always race ss tyres but whatever your times are post

track:

car:

tyres:

best lap:

controller:

maybe we can have an sau best lap times. i think if it does get some interest we keep it to ss tyres though

ill post up my times later in the day

Link to comment
https://www.sau.com.au/forums/topic/382046-gt5-fastest-lap-times/
Share on other sites

my fastest times

track: HIGH SPEED RING

car:

1 - gtr spec v 09 - 1:02,144

2 - mines r34 - 1:04,801

3 - r34 v spec 2 - 1:05,277

4 - 380rs spr lgr - 1:05,598

5 - rx7 spirit r 02 - 1:05,733

tyres: all sports soft

controller: ds3

-----------------------------------------------------

track: TRIAL MOUNTAIN

car:

1 - gtr spec v 09 - 1:26,388

2 - mines r34 - 1:27,908

3 - R32 v spec 2 - 1:27961

4- r34 v spec 2 - 1:28,081

5 - rx7 spirit r 02 - 1:28,644

6 - nsx type r 02 - 1:29,798

tyres: all sports soft

controller: ds3

-------------------------------------------------

track: DEEP FOREST

car:

1- mines r34 - 1:14,150

2 - r34 v spec 2 - 1:15,363

3 - r32 v spec 2 - 1:15,709

4 - rx7 spirit r 02 - 1:16,018

5 - r33 gtr v spec - 1:16,819

6 - nsx typr r 02 - 1:17,452

7 - sti 22b - 1:17,667

8 - evolution ix - 1:18,212

tyres: all sports soft

controller: ds3

-----------------------------------------------------

track: CAPE RING PERIPHERY

car:

1 - ct230 r 08 - 1:32,900

2 - mines r34 - 1:34,495

3- 380rs spr lgr - 1:34,987

4 - r32 v spec 2 - 1:36,551

tyres: all sports soft

controller: ds3

-------------------------------------------------------

track: NURBURGRING

car:

1 - mines r34 - 6:56,865

2 - r34 v spec 2 - 6:59,584

3 - 458 italia - 7:02,878

4 - r32 v spec 2 - 7:03,767

4 - 380rs spr lgr - 7:04,185

5 - sti imp spc c 04 - 7:04,850

6 - sti 10 18bbs - 7:11,435

7 - rx7 rz 00 - 7:12,150

8 - sti 07 type c - 7:14,860

tyres: all sports soft

controller: ds3

forgot to mention, all the cars above are tuned to MAX

Edited by M.C Ren

It would be good to do a Tsukuba "time attack" comparison using stock based road cars like GTR's/RX7's/EVO's etc. tuned to within an inch of their life just like the real event.

My bests are with a controller no assists, with best parts/setups possible:

- R32 GTR 53.6s

- RX7 54.2s

More tuning might get them going around even quicker!

I'm Confused.

Aren't there leaderboards or something with all the assists listed?

*hugs Forza leaderboards with every single time, assists used and ghost to d/l to race against*

yes there are but as he mentioned, the top bazzilion times for each track are all in the same car and within less than a second of each other. far too many crazy bastards out there with far too much time.

this is a good idea for some realistic human type times. i have only and will only play with a Wheel, but it will be good to see the general comparison, will post some times next time i get on and actually have a look.

^^êxactly ^^ as for playing with a wheel, i would only play with it too if i had one, im living overseas at the moment so its enough karting my ps3 around, no way i could bring a wheel, but post up your times anyway,

ill have a crack at tsakuba, my times will generally be fully tuned examples on sports soft tyres with abs 1 as the only assist, grip is set to real also,

smithy85

not sure what tyres you where using but after reading your post im guessing racing soft. i was trying to compete on ss tyres and i had no chance hehe

your r32 gtr time is pretty good, my gtr time might have a sec in it as it was a little hard to turn in, its perfectly se up for bigger tacks so i dont want to mess around with it just to lap tsakuba.

tsakuba isnt a track i really play as i thought it wasnt that technical, but after giving it a proper shot i realise you have to be pretty precise to reel off a good time.

anyway, i took a few cars for a spin, both with sports soft and racing soft

tsakuba

1 abs only aid

grip, real

SPORT SOFT times

hks ct230r - 54.685

r34 v spec 2 - 55.811

mines r34 - 55.860

sti spec c 04 - 55.946

r32 v spec 2 - 55.956

rx7 type r - 56.501

nsx type r - 57.360

tsakuba

1 abs only aid

grip, real

RACING SOFT times

hks ct230r - 50.956

mines r34 - 52.137

r34 v spec 2 - 52.678

rx7 type r - 52.800

r32 v spec 2 - 52.846

sti spec c 04 - 53.168

nsx type r - 53.584

Owgasm, post some times up of your best laps for other cars too. I wouldn't mind buying a few different cars myself.

I'll give the vettel a shot on Suzuka, but I find it very hard to get a clean and fast time on the ds3 controller. I'll see how I go

By the way fellas, times must be clean White times, if the time goes red for crashing ect, its not valid

cranked out a few more times, tried the red bull x on sazuka and kept getting a red time, got frustrated but ill try again another day

recap on all times posted

track: HIGH SPEED RING

car:

1 - gtr spec v 09 - 1:02,144

2 - mines r34 - 1:04,801

3 - r34 v spec 2 - 1:05,277

4 - 380rs spr lgr - 1:05,598

5 - rx7 spirit r 02 - 1:05,733

tyres: all sports soft

controller: ds3

-----------------------------------------------------

track: TRIAL MOUNTAIN

car:

1 - gtr spec v 09 - 1:26,388

2 - mines r34 - 1:27,908

3 - R32 v spec 2 - 1:27961

4- r34 v spec 2 - 1:28,081

5 - rx7 spirit r 02 - 1:28,644

6 - nsx type r 02 - 1:29,798

tyres: all sports soft

controller: ds3

-------------------------------------------------

track: DEEP FOREST

car:

1- mines r34 - 1:14,150

2 - r34 v spec 2 - 1:15,363

3 - r32 v spec 2 - 1:15,709

4 - rx7 spirit r 02 - 1:16,018

5 - r33 gtr v spec - 1:16,819

6 - nsx typr r 02 - 1:17,452

7 - sti 22b - 1:17,667

8 - evolution ix - 1:18,212

tyres: all sports soft

controller: ds3

-----------------------------------------------------

track: CAPE RING PERIPHERY

car:

1 - ct230 r 08 - 1:32,900

2 - mines r34 - 1:34,495

3- 380rs spr lgr - 1:34,987

4 - r32 v spec 2 - 1:36,551

tyres: all sports soft

controller: ds3

-------------------------------------------------------

track: NURBURGRING

car:

1 - mines r34 - 6:56,865

2 - r34 v spec 2 - 6:59,584

3 - 458 italia - 7:02,878

4 - r32 v spec 2 - 7:03,767

4 - 380rs spr lgr - 7:04,185

5 - sti imp spc c 04 - 7:04,850

6 - sti 10 18bbs - 7:11,435

7 - ruf rgt 00 -7:11.773

8 - rx7 rz 00 - 7:12,150

9 - sti 07 type c - 7:14,860

tyres: all sports soft

controller: ds3

-------------------------------------------

track TSAKUBA

car -----------------------------tyres- SS -----------------RS

1 - hks ct230r --------------- 54.685---------- 50.956

2 - r35 spec v --------------- 52.933

3 - R35 07 -------------------- 53.125-------------------------------BUNTA (1 on all aids) ds3

4 - r34 v spec 2 ------------ 55.811------------52.678

5 - mines r34---------------- 55.860 ------------ 52.137

6 - sti spec c 04------------ 55.946 ------------- 53.168

7 - r32 v spec 2 ------------ 55.956 ------------ 52.846

8 - 2010 sti------------------ 56.357

9 - rx7 type r-------------- - 56.501------------ 52.800

10 - 06 bmw m3------------ 57.045

11 - amuse 380rs----------- 57.170------------53.225

12 - nsx type r---------------57.360------------ 53.584

13 - r32 gtr----------------------------------------- 53.600--------------SMITHY85

14 - rx7--------------------------------------------- 54.300---------------SMITHY85

Edited by M.C Ren

Bunta, what do you mean with one of everything? As in aids?

I reckon we keep it to

1 abs

Grip set to real

And tyres of your choice

More skill is involved

What do you guys think?

I dont have any aids on :)

I meant one of everything as in the best of all the parts you can buy for the car. I think tyres should be kept to sprts tyres jusr like the superlap even run there!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's definitely not firing order. But I think it should also be made clear that the output that gets fired is the one that corresponds to the input that was switched at the ECU. So you could scramble them up totally so that the numbers meant nothing, and so long as you had the inputs and outputs matched up, you'd be fine. The reason I make that point is that blanket statements about what it is supposed to be don't always hold out in a world where there's been 30 years for the wiring to have been stuffed with.
    • Hello, im asking about this guy - coil igniter on rb25det series 1 r33 s1 engine. I need to know if pins on coil side indicate coils itself from 1-6 or it’s firing order so pin nr1 goes to 1st fired spark plug:(1pin-1firing spark, 2pin-5order firing spark, 3-3, 4-6, 5-2, 6-4…)   photo: https://files.fm/f/k9pdug38uq
    • Remove it. Certainly from the hub face. I'm not in love with leaving it on the wheel assembly surface either - but if it is common to do so, then....maybe fair enough. It's not difficult. Just time consuming. For the hub face you just need a large enough block and suitable grades of abrasive paper to get it off flat. The same would be true of the assembly face. Just more time consuming, probably needing a lot more care. It's defo going to be easier just to assemble the wheels as is, seal them up, and check them periodically to see if there's any movement or loosening of the fasteners, than it will be to remove it though.
    • Hello, I got my wheels powder coated and they've powder coated bloody everything the mating surface and hub (even told them not to lol) anyway should I leave it or remove it. (Would be very hard) I've searched a lot and lots of powder coaters don't mask the mating surface but do mask the hub surface. How bad it powder coat on the mating surface or hub? My question is what should I do?
    • Yeah, R34 with RB25DE likely has a 4AX01 box in it, which is a medium duty auto ~ with the RB25DET mill, it would've been fitted with 4AX00 (4AX13) heavy duty build (same case, different internals). An RB25DET will lunch on a medium duty 4R01 auto in pretty short order ...to give you some visual idea of differences between the 'medium' and 'heavy duty' boxes, you only have to look at the 2/4 band for comparison...it's chalk and cheese...(plus bigger high clutch, extra pinion in the planetary sets, higher oil pump output, different bearings, higher TC stall speed )... You can control them with just about any aftermarket TCU for electric-over 4-speed with TC lockup clutch (ie; the GM 4L60E and others)...I have a custom standalone TCU that includes MAP sensor (for turbo applications) along with TPS, RPM, and line pressure monitoring...in other words, I don't use any ECU signals...no real need to.
×
×
  • Create New...