Jump to content
SAU Community

Defi Advance Zd Install And Use With Speedo Correction

komdogg

By komdogg,
in Car Audio & Electrical

 Share

Recommended Posts

komdogg Apprentice

komdogg

Posted
Posted

Ok so I'm thinking about getting the defi advance zd club sports package plus a boost gauge to plug into it and got a few questions for those with experience.

How does the zd tap into rpm and speedo signals?

Where is the speedo wire in an r33 gtst? Where does it run to, from and through what parts of the car does it run?

If I'm using an ecutalk box or nistune to correct my speedo signal (for big rims, diff ratio etc) and assuming that the zd taps off the speedo wire, will it read the corrected speed, or stay with the incorrect original speed?

I know that the ecutalk box plugs into consult, but how does it modify the speedo signal if the speedo doesnt go through the ecu? or does one of the consult wires go straight to the speedo?

Basically what I want, is to be able to have my defi zd hooked up, and to have it display the corrected speed on both the speedometer and the zd display.

One more thing; if you buy say a boost gauge to plug into the advance control unit, does it come with the boost sensor? Or do they expect you to fork out another 200 bucks for the sensor, because that would make the price about 500 bucks per gauge, which is ridiculous.

Hope this is the right section, couldn't find anything else regarding electronics.

Cheers

shinyurikai Enthusiast

shinyurikai

Posted
Posted

Yes they all come with the sensors and a manual. you'll need the control unit for them to all work. Trust me You won't regret buying them. I've got the water temp, oil pressure and the boost gauge and then I've got the greddy informer to read the rest.

  • 2 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
    • MBS206
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By MBS206 · Posted

      That's some really horrible design with the way it's cut/shaped! Is there much damage to the box that failed in? IE, new fork and you can go again, or is it a total rebuild again? Id be trying to build that piece from scratch, and getting some reliefs added in the corner to hopefully stop breakage, and then swapping boxes ASAP, and then doing the same to the currently good working box. I'm assuming hard shifts have not been friendly to it!
×
×
  • Create New...