Cam Shafts Rb26 264\s 10.08 10.01 Lift

[Gtir-keiron]

Ok so i picked up a set of hks cam shafts for my nur spec motor.

they are

hks 10.08 lift 264s

hks 10.01 lift 264s

Could some one please explain how these will differ from 9.15 lift 264s pon cams?

What am i gaining from more lift ,These do not seem to be a off the shelf set of cams correct me if im wrong.

My current set up is hks25/30s.My motor droped a ring lan was making around 460-470 on a hub dyno hp atw stock cams

Looking at going a single turbo set up around the 700 to 750 hp mark turbo.

These cams suit this set up?

[blue_vl_t]

They are close in spec to the jun 264 9.7 cams I run,

The poncama are 260 so you have a bit more duration, which tends to shift the power band a touch higher in the rev range. The extra lift gives more flow. I havn't heard of the specs of these cams before, you sure it's correct.

[Gtir-keiron]

yep i have em sitting here in front of me mate they are stamped this way.

Bought em from jpn and thought that lift was a bit odd.Was going to use them with the 25/30s thought it would give me a little more top end.

they are odd tho yes?

must be a custom job i think

Edited November 9, 2011 by Gtir-keiron