Jump to content
SAU Community

Recommended Posts

The JZX100 (or the later models of it) use a 1JZ single turbo same as the late model Soarers (as the early ones use a twin setup). Both the late soarers and the Chaser also have VVTI. Essentially they are the same engine.

In terms of twin setups.. I'm assuming you're talking about Japan as theres barely any JZX100's in Australia... if you are yes it has been done many times over. I disagree with the comment that people buy single turbos because they are "cheaper". A turbo conversion is not a cheap exercise either way but consider why someone may buy two singles as opposed to a large single on a GTR. They'll have different characteristics in responsiveness, power, lag etc etc.

I wonder what happens to the engine management system if, say, one wants to convert a twin turbo setup on a supra to a single turbo setup. Does aft ECU like PowerFC can be used to control a twin turbo setup and/or single turbo interchangeably?

Maybe you're right, this will be extra $$$ involved changing the ECU when you converse twin to single turbo/vice versa?

On the other hand, if Toyota decides to abandon the twin turbo setup will that be due to production cost/meeting emission requirement in Japan?

I think JapLink in NSW already start importing JZX100 to aus, but hey, I dunno, check with them. HPI said their phone no is 02-97160857. Do they have a website btw?

I'm 99% sure that the JZX100 is already a single setup.

Anyway the Chaser has already been discontinued in Japan as of this year. I think all 2JZ and 1JZ engines are being discontinued.. some already are such as the JZA80 Supra, Mark 2 I believe has also been discontinued. Yes these engines are being discontinued for emissions. No idea about production cost.

Yes if you buy an aftermarket turbo you should buy a new ECU. Its not really as simple as just changing a setting on the handset I think. With different turbos you probably need to upgrade different things. For example in a GTR if you edn up getting a single conversion it is usually a pretty big turbo. This means upgading a lot more things than just the turbo.... such as intercooler, ECU, injectors and the whole fuel system like fuel pump an regulators etc, AFM's lots of things..... in order for all these things to be tuned properly aftermarket ECU is needed.

So what r they gonna use to replace 2JZGTEs then? Is Nissan also abandoning the RB engine soon? Looks like the death of the turbo era :D **sigh** I read that R35 skyline (or V35 callit whateva) would not likely to be turbocharged.... I wouldn't mine tho if they pack all these cars with V8, V10 or V12 & 400kw inside heheheh

I can't remember the replacement. But many of the toyota turbo models such as the Mark2, Laurel and Chaser have been merged into a few models that bridge the gap between the different kinds of cars...... none of the engines are turbo... YET!

I THINK the RB's have already been discontinued... the V35 at the moment has an atmo engine.... dunno if turbos are on the horizon...

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Not a problem at all Lithium, I appreciate your help regardless. I've pulled a small part of a log where the target pressure was 28psi and it spiked to 36.4psi. I've only just begun using Data Log Viewer so if I'm sending this in the wrong format let me know.
    • Sorry had a bit of a week and haven't had heaps of time to follow this, so apologies if I've missed something - any chance of showing a log with the rpm, turbo speed, MAP, and wgdc all in one view? Definitely an "interesting" problem, and while it's definitely worth noting that there was a similar issue with the twins I'd not completely put all bets on the root cause being the same thing.  Keep an open mind, follow the data.
    • I built this engine approximately 12 years ago so my own head (brain) is a little grey on the exact hardware in the RB head, however what I recall is. Stock RB25 NEO TURBO Intake Camshaft HKS 260 degree Exhaust Camshaft (R34 GTR) RB25 NEO Turbo Springs  I ported/removed the exhaust stud humps found in the RB25 head so theres less turbulence but it wasn't ported/polished properly, just a hump removal. I've attached two pictures of the before and after to illustrate.     The ECU gets its boost reference from the nipple on the rear of the head on the intake side, behind the fuel rail. The wastegate gets its boost reference from a nipple on the cooler pipe immediately after the comp cover.  Could a decent pressure drop across the intercooler cause the wastegate to be seeing a higher PSI than what the ECU is seeing, and thus it can't control it accurately and quick enough?   We ran a line to the actuator and watched it open and close using an air compressor, while we didn't have a gauge on the line to see when it was cracking open, it was opening smoothly.  I just removed the gate now and even though the documentation says you need to open it in a vice due to preload (which I did), there wasn't any preload on the cap, which is something we noticed straight out of the box as well when new. This silver cap internally is threaded to the actuator rod that runs out the bottom of the straightgate. Not sure how I'm supposed to get this spring out to be frank.. Potentially but everyone else doesn't appear to have to stop at 500kw because of 6boosts design.  I would, but I think I'm getting to that point where if I'm going to do the head and make another 100kw, then I'm going to need a fancy gearbox and quite a few other things and 10k becomes 20k becomes 30k within a few months. I'm not necessarily sold on the idea just yet that the head is restrictive at 4000rpm (and what.. 300kw?) and yet doesn't seem to be restrictive at 7000rpm when it's making 500kw, however I'm obviously not closing the door on that theory.
    • Yeah - Half the problem is I know this sensor actually goes to 150C.. I'm pretty certain it is min of 11C. So still more data required I suppose. It's really quite hard to get the oil temp to 100+ then immediately pull over and take a reading before the temp drops. Annoyingly I suppose the range I really 'want' is likely 80 -> 120C. TBH the ecu can't really *do* anything with it, and the gauge itself is very visible... ...but you know how it is.
    • My EFR 8474 Black, made 800awhp on a roller dyno. at 25-26psi. E85. Shaft speed was around 106,000rpm 1.01 rear. The rear is maxed.  6 boost Turbosmart 60mm gate 3.5inch exhaust  Head is worked to the shithouse. Bain racing. VCam. 272 exhaust. RB28 - RB26 foundation.  You have an intake issue. Start getting proper data and I mean go back to the simple things.  - Pressure test your intake - Block off the Turbo BOV, you don't need it.  - Test pressure before and after your intercooler If your head is pretty stock, that is your issue. Especially if it is NA.  Take it off and spend $10k on it. 
×
×
  • Create New...