Jump to content
SAU Community

EOI: FOXTEL Digital Set Top Box/Unit

Hi Octane

By Hi Octane,
in For Sale (Other Items)

 Share

Recommended Posts

wreckedhead Mentor

wreckedhead

Posted
Posted

is that the same box that you get when you order foxtel digital, if it is message me ill take it off your hands pending i can get foxtel to hook it up. as i have the normal foxel now.

wreckedhead Mentor

wreckedhead

Posted
Posted

i spoke to my mate that works for foxtell and he told me you ant use other foxtell boxes casue foxtell never sold them indevidually unless it was satelite digital.

sorry man cant buy it off you. he just organised to get my digital installed tomorrow.

2rismo Grand Master

2rismo

Posted
Posted

Perhaps the following will help in the sale of this decoder:

Satellite television from Optus/Austar/Foxtel has ALWAYS BEEN DIGITAL. That's why it's called Digital Video Broadcast. The 'Digital' tag is applied because people already nderstand the concept of digital set top boxes and having access to different angles at the footy etc....

With satellite tv, it is a total FARCE! The different angles are actually broadcast simultaneously as seperate channels so when you change angles you're really just changing the station you're watching.

Sorry for the sat tv lecture but this should stop the bs'ing that i keep hearing about 'digital' this and 'digital' that.

Adrian

funkymonkey Grand Master

funkymonkey

Posted
Posted

At the end of the day, what can you do with it, and how do you use it if you don't have foxtel (ie what do you have to do to use it in your house, anything you have to tell foxtel, ie "I already have a box, can you hook me up?"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      What accelerator cable can be used with greddy plenum

      By Duncan · Posted

      I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • V36
      What accelerator cable can be used with greddy plenum

      By V36 · Posted

      HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...