Jump to content
SAU Community

[Wtb] 550Cc+ X6 Side Feed Injectors // Decent Cond Twin Plate Clutch


Recommended Posts

Hey All I'm looking for injectors for my Rb25Det, need at least 550cc or bigger side feed injectors, that include plugs and collars to fit Rb25, I'm working on a budget so looking for good condition used injectors basically.

Preferably in Victoria otherwise will need good picture and part-no if interstate.

Also looking for a decent cond Twin-Plate Clutch for RB25.

Hey All I'm looking for injectors for my Rb25Det, need at least 550cc or bigger side feed injectors, that include plugs and collars to fit Rb25, I'm working on a budget so looking for good condition used injectors basically.

Preferably in Victoria otherwise will need good picture and part-no if interstate.

Also looking for a decent cond Twin-Plate Clutch for RB25.

gday there buddy , i just posted up a fair few different brands on another member who was after some injectors for a rb25det as well .

also i sure do have a brand new exedy twin plate , 5 puck , brass button clutch that is pretty much brand new with 98% meat . to suit your rb25det , came out of my rb25det cefiro might i say very strong and powerful clutch hehe .

will post up some pics and info on the injectors and see if i can take a pic of the clutch next day or too

1) blitz side feed injectors - 550cc x 6 = $1170 full set .

BLITZINJECTORS.png

2) hks side feed injectors - 555cc x 6 = $1220 full set .

injectors-small.jpg

3) nismo side feed injectors - 555cc x 6 = $1150 full set .

nismoinjectors555.jpg

4) sard side feed injectors - 550cc x 6 = $1120 full set .

sard20injectors.jpg

let me know and hope we can sort this out for you asap , thanks for your time , anthony

Edited by DRIFT RACING INDUSTRIES
  • 2 weeks later...

Hi there,

We can supply x6 Tomei side feed injectors and EXEDY clutch to suit your application

Please send us an email or PM, [email protected]

Thanks

Jez

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...