Jump to content
SAU Community

Wtb: Stock Or A/m Low Mount Rb20/25 Turbo Ex Manifold + 40-44Mm Vband Ext Gate


Recommended Posts

hi guys, im after either a) stock RB20/25 cast iron turbo exh manifold or b) aftermarket low mount manifold

and a 40mm/42mm/44mm external gate with Vband fittings (preferred but open to other suggestions).

If you got any of the above that im after, feel free to post here or send me a PM.

manifold must be located in Sydney, but the ext gate will buy from interstate if buyer is happy to ship it to me.

thanks.

I have a manifold in Brisbane $20 plus post

pm me for detail

hi guys, im after either a) stock RB20/25 cast iron turbo exh manifold or b) aftermarket low mount manifold

and a 40mm/42mm/44mm external gate with Vband fittings (preferred but open to other suggestions).

If you got any of the above that im after, feel free to post here or send me a PM.

manifold must be located in Sydney, but the ext gate will buy from interstate if buyer is happy to ship it to me.

thanks.

hi guys, im after either a) stock RB20/25 cast iron turbo exh manifold or b) aftermarket low mount manifold

and a 40mm/42mm/44mm external gate with Vband fittings (preferred but open to other suggestions).

If you got any of the above that im after, feel free to post here or send me a PM.

manifold must be located in Sydney, but the ext gate will buy from interstate if buyer is happy to ship it to me.

thanks.

hey there bud , how are ya , sure i can help you out hey .

i can help you out with both low mount manifolds but recommend you go the stock cast iron as its more reliable and can withstand heat and cracking not like alot of the stainless manifolds out there on the market .

also can supply you any external wastgate you like from a tiall 44mm mvr water cooled external wastegate

tial-hw-wg44wpair_m.jpg

or to a turbosmart 40mm external comp wastegate or

turbosmart-comp-gate-40mm-wastegate-0.jpg

as you said a turbosmart 45mm pro gate .

4639.jpg

i am also in sydney , open 7 days long hours and hope we can sort this out for you asap man .

i am from western suburbs , liverpool area .

let me know if your interested mate and if there is anything else i can help you out with dont hesistate to ask hey

thanks for your time , anthony

Edited by DRIFT RACING INDUSTRIES

We can supply Tial or Turbosmart wastegates

Send us an email or PM if you are interested, [email protected]

Look forward to hearing from you!

Jez

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
×
×
  • Create New...