Jump to content
SAU Community

Recommended Posts

HEy guys,

As some of you know I am getting an R32 gts-t later in the year, most likely an import from Japan. And I have read alot about what mods you guys have done to get certain RWKW {rear wheel killowatt figures} figures. But I am just trying to figure out something. They say the stock R32 GT-R with 206KW does the 1/4 in 12.9..there abouts. Now i don't know what 206 is at the rear but when I hear that someone who has done mods to there GTS-t to achieve 200+ rwkw figures, but only 13's 1/4 figures.

Does this all come down to the fact that the GT-R is 4wd?

I wouldn't have thought that a car with 200+rwkw's wouldn't struggle to get close, but should actually beat the GT-R. Am I just stupid? :throwup:

Also, do you think it would be difficult to find a R32 gts-t in Japan that has had a RB25 conversion already done to it? Or whould I be better to search for a car with mods like apex FC, turbo timer, larger intercooler, clutch , etc...

Thanks folks.

:ghost:

Unless you are getting the car as a 15yo import then it has to be completely stock to get in under the new laws.

I think you still can't get r32s imported under sevs though. Haven't checked for a few months though.

The GTR gets all of its power to the ground which gives it very nice 1/4 mile times. Also the GTR would have more power than the 206kw stated. I would speculate around 230kw stock.

Yes I forgot that the Japanese often had more power than was shown.

And to answer BHDave, Yes I will be looking at getting one under the 15 year deal which as I understand, they just need to have an engineer's approval after the minor compliances are done.

Thanks again

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...