Jump to content
SAU Community

Recommended Posts

Hi Guys , sorry for the delay , just got home from Tassy.

VIC STATE CRUISE is ON!

22nd Jan is the date , two weeks away , just before Aust Day, UPPER Yarra Dam is the location , There will be TWO assembly points . 1st Mick will be at Monash Uni off Wellington Rd meeting time 10.00 am for a 10.30 departure and will LEAD the group and travel via the same route as the cancelled Lilydale lake cruise but continue on through Lilydale and turn right at Maroondah Highway and then right into Warburton Hwy , then onto Jarra Junction (approx 28km).

Second Assembly point will be approx 800mtrs through Yarra Junction on your left (plenty of room to park) where the Western suburb guys can meet with Adam and Myself if they wish, that will get us to the dam somewhere aruond 1.00/1.30pm , bring your own everthing BBQ`s are on site.

PLEASE REMEMBER THAT WE ARE USING PUBLIC ROADS ,HOONING,SPEEDING WILL BE FROWNED ON AND WE ARE THERE TO HAVE A GOOD DA Y,

Does anyone know how to contact the "V" guys it will be greatly appreciated.

Any Questions . Dennis.

P.S. I will do a map any update the post.

Link to comment
https://www.sau.com.au/forums/topic/387666-vic-state-cruise/
Share on other sites

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

coparts - I'm assuming the second meeting point (for the westsiders) is the car park at Yarra Junction Reserve??? and what would be the best time to meet (best case senario according to Google Maps is around 12ish)..

Is anyone bring Walkie Talkies??

Sorry to throw some rocks on your road...but are you sure about the route?was checking it through Google (long story short ,the miss has problems with mountain roads so I checked first...)in your second map you are following the yarra river course ...don't know just asking,Thanks.

post-52922-0-88785800-1326699337_thumb.jpg

post-52922-0-40540500-1326699347_thumb.jpg

post-52922-0-30691000-1326699358_thumb.jpg

11.30 / 12.00 sounds good to me ,area no 2 as mentioned is approx 800 meters through Yarra Junction on your left (it is the old highway before the realignment ) and yes most of the route follows the river and winds up through the hills to the Dam, bitumen road is good as we traversed it in the opposite direction the last cruise

Hi Guys , sorry for the delay , just got home from Tassy.

VIC STATE CRUISE is ON!

22nd Jan is the date , two weeks away , just before Aust Day, UPPER Yarra Dam is the location , There will be TWO assembly points . 1st Mick will be at Monash Uni off Wellington Rd meeting time 10.00 am for a 10.30 departure and will LEAD the group and travel via the same route as the cancelled Lilydale lake cruise but continue on through Lilydale and turn right at Maroondah Highway and then right into Warburton Hwy , then onto Jarra Junction (approx 28km).

Second Assembly point will be approx 800mtrs through Yarra Junction on your left (plenty of room to park) where the Western suburb guys can meet with Adam and Myself if they wish, that will get us to the dam somewhere aruond 1.00/1.30pm , bring your own everthing BBQ`s are on site.

PLEASE REMEMBER THAT WE ARE USING PUBLIC ROADS ,HOONING,SPEEDING WILL BE FROWNED ON AND WE ARE THERE TO HAVE A GOOD DA Y,

Does anyone know how to contact the "V" guys it will be greatly appreciated.

Any Questions . Dennis.

P.S. I will do a map any update the post.

What time do you guys anticipate arrival and departure of second meet point? I'm hoping to join you guys there. Actually thinking of selling my V36 Coupe and buying a Stagea!

Chris

I might meet you guys at Lilydale.

Anyone else from the North/North East want to meet me somewhere then hook up with the main bunch @ Lilydale?

Well, my Mrs has just informed me that she won't be out that long in the morning and she's booked us in to look at a couple of cars for her early Sat morning so I'll probably lob at the meet point and shuffle off with everyone but at some stage zig when you guys zag and head home.

So, who's heading to Monash from the north/north east?

well you can meet up with me at maccas bell street if you want

It's a bit of a shizen place to get to, but it'll be early on Saturday so traffic should be pretty light.

I'll meet you there at 9am.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
×
×
  • Create New...