Jump to content
SAU Community

Recommended Posts

I bought it off this guy in Melbourne (Import Revolution Pty Ltd), it was a straight plug-in to the original antenna socket. I picked it up in person and paid $40 only, he is a good guy and has a V36, was chatting to him for ages about my car. He's located in Bayswater, but his eBay shop ships Aus-wide.

http://www.ebay.com.au/itm/Nissan-Skyline-V36-Band-Expander-/220879380750?pt=AU_Car_Parts_Accessories&hash=item336d6fe10e

It's +14Mhz so when you see FM 86.3, it's actually FM 100.3. Pretty easy to install, I've taken the dash of the V36 apart a few times now so I can nearly do it with my eyes closed now.

Link to comment
https://www.sau.com.au/forums/topic/388629-v36-radio/#findComment-6194688
Share on other sites

I bought it off this guy in Melbourne (Import Revolution Pty Ltd), it was a straight plug-in to the original antenna socket. I picked it up in person and paid $40 only, he is a good guy and has a V36, was chatting to him for ages about my car. He's located in Bayswater, but his eBay shop ships Aus-wide.

http://www.ebay.com....=item336d6fe10e

It's +14Mhz so when you see FM 86.3, it's actually FM 100.3. Pretty easy to install, I've taken the dash of the V36 apart a few times now so I can nearly do it with my eyes closed now.

Hi Steve,

I purchased a bandwidth expander over 12 months ago but have still not fitted it. I got as far as removing the glovebox and thought it just looked to risky to continue! any tips for what needs to be removed or fastest way to get the expander installed?

Chris

Link to comment
https://www.sau.com.au/forums/topic/388629-v36-radio/#findComment-6194811
Share on other sites

Hi Steve,

I purchased a bandwidth expander over 12 months ago but have still not fitted it. I got as far as removing the glovebox and thought it just looked to risky to continue! any tips for what needs to be removed or fastest way to get the expander installed?

Chris

Why you going through the glove box? I took the center dash apart, which requires around 10 screws and taking off the gear stick to do. It should only take around an hour the first time you do it.

Just follow this guide to get the dash off to get access to the back of the unit, IIRC the radio antenna is located on the bottom right (drivers side) of the radio once you pull it out. I hope the one you have is a straight plug-in?

Link to comment
https://www.sau.com.au/forums/topic/388629-v36-radio/#findComment-6195010
Share on other sites

Why you going through the glove box? I took the center dash apart, which requires around 10 screws and taking off the gear stick to do. It should only take around an hour the first time you do it.

Just follow this guide to get the dash off to get access to the back of the unit, IIRC the radio antenna is located on the bottom right (drivers side) of the radio once you pull it out. I hope the one you have is a straight plug-in?

Thanks Steve,

Newan at Irev did mine for me this morning.

Nice job Newan, thanks.

Chris

Link to comment
https://www.sau.com.au/forums/topic/388629-v36-radio/#findComment-6196653
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...