Jump to content
SAU Community

Recommended Posts

I am thinking about replacing my OEM spoiler with a 33 GTR spoiler.

How would be the best way to do this? Does the GTR bonnet fit perfectly on a GTS-T?

Before i buy the GTR spoiler, i just want to find out what the options are!

Thanks rolleyes.gif

If you are referring to a R33 GTR bonnet/spoiler on a R33GTST then I can tell you that the spoiler will fit fine BUT, the bonnet will not as GTR's are wider!! Hope that helps, and like ONEDGE said, if you have a R34 then it won't fit at all which is pretty much self-explanatory really.

If you are referring to a R33 GTR bonnet/spoiler on a R33GTST then I can tell you that the spoiler will fit fine BUT, the bonnet will not as GTR's are wider!! Hope that helps, and like ONEDGE said, if you have a R34 then it won't fit at all which is pretty much self-explanatory really.

Sweet, so if i get a seperate spoiler, will fit on the stock brackets no problems?

Thanks alot, has helped heaps.

Sweet, so if i get a seperate spoiler, will fit on the stock brackets no problems?

Thanks alot, has helped heaps.

Hi mate, not sure what you mean be separate spoiler, but if you put the GTR one on, it will definitely fit but you may be to put extra holes in as from my memory the stock GTS-T one has different screw locations but the GTR being slightly bigger will sit over and cover up those existing screw holes anyway. If you are really worried about stiff fitment, you can also apply some glue to keep it in place also like I did on mine.

In regard to the GTR spoiler - I suggest you get the one with the break lights on the centre bottom area as it looks so much nice when lit up than the one without those lights but be prepared to pay approx $500 plus paint for one so it should set you back almost $900 fitted. Then you can always get some GTR/Nismo/Carbon Fiber end caps to finish off the look.

Good luck mate. I personally think the GTR spoiler is the nicest for a R33. A lot of people say the duckwing thing looks good but to me it is simply ugly and the T-Wing (otherwise known as shopping cart) style ones are ugly UNLESS you plan to track your car and are adding it for performance reasons. Hope that makes sense.

SM

Hi mate, not sure what you mean be separate spoiler, but if you put the GTR one on, it will definitely fit but you may be to put extra holes in as from my memory the stock GTS-T one has different screw locations but the GTR being slightly bigger will sit over and cover up those existing screw holes anyway. If you are really worried about stiff fitment, you can also apply some glue to keep it in place also like I did on mine.

In regard to the GTR spoiler - I suggest you get the one with the break lights on the centre bottom area as it looks so much nice when lit up than the one without those lights but be prepared to pay approx $500 plus paint for one so it should set you back almost $900 fitted. Then you can always get some GTR/Nismo/Carbon Fiber end caps to finish off the look.

Good luck mate. I personally think the GTR spoiler is the nicest for a R33. A lot of people say the duckwing thing looks good but to me it is simply ugly and the T-Wing (otherwise known as shopping cart) style ones are ugly UNLESS you plan to track your car and are adding it for performance reasons. Hope that makes sense.

SM

Thanks so much mate, you really helped heaps. Answered pretty much all my questions :).

Looks so nice, the GTR look :).

Thanks again SM :).

Thanks so much mate, you really helped heaps. Answered pretty much all my questions :).

Looks so nice, the GTR look :).

Thanks again SM :).

You're welcome mate.

Not many spoilers look nice on a R33 so make sure you choose the right one. Good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...