Jump to content
SAU Community

Recommended Posts

Sorry to hear about the prang Joel :mad: You should be able to get all the parts you need to do a full repair, without it costing too much. It may take a little while, but then so do smash repairers.

I always make a habit of getting NCB protection, you just never know.

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/page/2/#findComment-797636
Share on other sites

My previous car was a VS 5ltr manual. It had ABS.

When I first jumped in to the Skyline that was one thing I missed.

Any Idea whats involved in slapping a ABS in to my car?

The VS used to have the wheel speed sensors at the just off the IRS diff (looked like a large set of gears that had an optical looking sensor).

So I would assume if the Skylines are similiar I would need to use an ABS diff or just the (whats the word for them? mental blank) The rods that go to the wheels that provide the drive.

Not depressed at all though.

Gives me a good excuse to finally get the left guard/part of the roof fixed from a bodgy previous repair. + a few other things that were bugging me.

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/page/2/#findComment-804465
Share on other sites

names Nhan..ive only been at chevron for bout 6 months?

ive heard about u coz i drive a 32 as well. everyones like "oh joel use to drive a black one"

yeh brendan got his 32 bout 3 months? nice black one with an r34 wing

he came down last weekend so we could help him put lower springs on

so have u fixed ur car yet? might as well put on a bodykit while u r at it!

u should come down and visit us sometime! u'll see three 32 coz ma bro drives one as well

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/page/2/#findComment-818006
Share on other sites

nar cars not fixed yet..

I'm keeping the stockish look.

I like the look of a stocker R32, big tyres hanging out the back with a stockish looking muffler that has a nice 3.5" s/steel pipe. I'm not big into milo-tin mufflers, atmo bovs, lowering & big body kits etc. :rant:

Is Gary still there? He use to own a really clean VLT.

I'll come down and show him the new motor when its in.

Link to comment
https://www.sau.com.au/forums/topic/39165-prang/page/2/#findComment-818051
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...