Jump to content
SAU Community

Recommended Posts

i know , ive searched up and down i just cant find the issue,

My MAF died in the butt so i got a nother one, but ive plugged it in and my r33 will not hold idle its jumpy, and then eventually it stalls, What compensates this reason for stalling, is it a simple Reset of the ECU? or what other issue will i be finding.

Any help would be Massively appreciated , i am pulling my hair out

Btw, when i tap the accelerator, it holds revs at about 1400 rpm then drops drops drops to jumpy jumps and then stalls,

This is on cold Start.

any help would be helpful!

Willz

Link to comment
https://www.sau.com.au/forums/topic/392496-problem-with-my-gtst/
Share on other sites

thanks for the help bro, i found the problem at ease, was intake pipe , came lose and caused it to stutter and spit. put it all back together now she runs better and normal. Feel so much better now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys I have a 2001 Nissan stagea vq25det, I don't have any engine lights and not really any issues running but I was curious to see if I could use my obd II scanner to find anything that was hidden and I plugged my scanner in and it just said "Low voltage cannot scan" does anyone know how to fix this or what this could be?
    • Sadly we have something in common, our Skyline's like blowing up electrically 😢
    • So, no videos, but, the FAB9 Elite manifold and 68mm Bosch throttle bodies are in stock, but, not the rear part of the air box The FAB9 rear airbox thingie is made with a 3" intake pipe, to suit the 3" intake pipe size of a 68mm throttle body  When they get some more in stock is currently unknown as I'm waiting for FAB9 to reply with a ETA on resupply, my assumption is they outsource their plastic printing stuff to "china", and with the current "tariff war" going on in 'Merica it could be on hold for an undisclosed time Should I pull the pin on the Intake and throttle body, and wait for the airbox?????, that's what I'm thinking... 1. Would the standard 2.75" OEM intake on the air box really be that much of a restriction compared to the 3" naturally aspirated?????? 2. If I don't get the 3" FAB9 airbox fitted at the same time as the intake and throttle body will it need a retune, when/if it eventually turns up?????? As I'm impulsive, to a fault, decisions will be made within....."what's the time now"???....let's say 12 hours......LOL
    • yeah its just so expensive nowadays and its easy to lose motivation very quickly when you start adding up the costs. I acquired the car from a collector in Melbourne and was lucky to get the opportunity to buy something already completed.  I looked at a proper resto and your paying over 300-400K for a proper one (nut and bolt) so this one to me seemed like a much better option! Car is in private storage and for serious buyers, welcome to come see it/drive it in person (photos don't do it justice). 
×
×
  • Create New...