Jump to content
SAU Community

New Genuine Bosch / Jecs Z32 Air Flow Meter Afm - $285 Incl. Delivery

VultureMotorsport
 Share

Recommended Posts

VultureMotorsport Mentor

VultureMotorsport

Posted
Posted

GENUINE Z32 AIR FLOW METER

- Large 80mm diameter - most common AFM upgrade

- Genuine BOSCH/JECS - manufactured in Japan
- Wiring diagrams also available on request
- Can also supply TOMEI Plug $40 w/ wiring OR BOSCH Plug $30 w/ no wiring.
- OEM # 22680 30P00 (VG30DETT engine)

$345 $285 incl. Delivery >> SAU Special

BUY_BUTTON.gif

* This is an Australian delivered product with a full national warranty.


AFM-029_400.jpg


AFM-029_box.jpg

  • 3 months later...
VultureMotorsport Mentor

VultureMotorsport

Posted
  • Author
Posted

New batch just in!

Feel confident in that you are purchasing a Genuine Z32 AFM.

BOSCH Plug - $25 with same day dispatch!

  • 2 weeks later...
  • 1 month later...
VultureMotorsport Mentor

VultureMotorsport

Posted
  • Author
Posted

deilvery to sydney 2763 with plug to suit r34 in stock?

Hi,

Tomei Plug w/ wires would be $320 or BOSCH Plug w/ no wires would be $310 both incl. delivery.

Being a larger AFM then the stock 70mm one some modifications will be required.

- Brendan

  • 1 month later...
  • 6 months later...
  • 1 month later...
Serpandrew Rising Star

Serpandrew

Posted
Posted

So the tomei plugs have wires that have to be cut/soldered into the original afm wires, and the for the bosch connectors you have to undo the wires from the original connector and push them into the bosch one?

VultureMotorsport Mentor

VultureMotorsport

Posted
  • Author
Posted

So the tomei plugs have wires that have to be cut/soldered into the original afm wires, and the for the bosch connectors you have to undo the wires from the original connector and push them into the bosch one?

Hey!

Correct the BOSCH plug comes with no wires and the Tomei unit comes with wires. In most cases the Tomei one is an easier choice to work with.

- Brendan

  • 3 months later...
  • 11 months later...
VultureMotorsport Mentor

VultureMotorsport

Posted
  • Author
Posted

100% Genuine unit's only!

​.... for those note sure if what they have is a genuine unit just check if the sensor inside has a red coloured band around it!

  • 2 weeks later...
VultureMotorsport Mentor

VultureMotorsport

Posted
  • Author
Posted

Hey mate, do you have any plugs to for the Z32 to be used on a S15?

Yo!

Easiest option would be a Tomei plug which you can wire up to the original harness.

Let me know,

Brendan

(VM)

  • 10 months later...
 Share
Go to topic listing


  • Latest Posts

    • joshuaho96
      GTX2867R GEN 2 NO OUTPUT FOR BOOST SOLENOID

      By joshuaho96 · Posted

      From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • MBS206
      Nissan Skyline R34(ER34) Front Suspension Noise

      By MBS206 · Posted

      I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Summernats cruiser?
    • MBS206
      NC MX5

      By MBS206 · Posted

      Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      But if you had to go bury a body in the forest, would you not put that in the boot? Most of them are >=90kg these days.
×
×
  • Create New...