Jump to content
SAU Community

Recommended Posts

GENUINE Z32 AIR FLOW METER

- Large 80mm diameter - most common AFM upgrade

- Genuine BOSCH/JECS - manufactured in Japan
- Wiring diagrams also available on request
- Can also supply TOMEI Plug $40 w/ wiring OR BOSCH Plug $30 w/ no wiring.
- OEM # 22680 30P00 (VG30DETT engine)

$345 $285 incl. Delivery >> SAU Special

BUY_BUTTON.gif

* This is an Australian delivered product with a full national warranty.


AFM-029_400.jpg


AFM-029_box.jpg

  • 3 months later...

New batch just in!

Feel confident in that you are purchasing a Genuine Z32 AFM.

BOSCH Plug - $25 with same day dispatch!

  • 2 weeks later...
  • 1 month later...

deilvery to sydney 2763 with plug to suit r34 in stock?

Hi,

Tomei Plug w/ wires would be $320 or BOSCH Plug w/ no wires would be $310 both incl. delivery.

Being a larger AFM then the stock 70mm one some modifications will be required.

- Brendan

  • 1 month later...
  • 6 months later...
  • 1 month later...

So the tomei plugs have wires that have to be cut/soldered into the original afm wires, and the for the bosch connectors you have to undo the wires from the original connector and push them into the bosch one?

So the tomei plugs have wires that have to be cut/soldered into the original afm wires, and the for the bosch connectors you have to undo the wires from the original connector and push them into the bosch one?

Hey!

Correct the BOSCH plug comes with no wires and the Tomei unit comes with wires. In most cases the Tomei one is an easier choice to work with.

- Brendan

  • 3 months later...
  • 11 months later...

100% Genuine unit's only!

​.... for those note sure if what they have is a genuine unit just check if the sensor inside has a red coloured band around it!

  • 2 weeks later...

Hey mate, do you have any plugs to for the Z32 to be used on a S15?

Yo!

Easiest option would be a Tomei plug which you can wire up to the original harness.

Let me know,

Brendan

(VM)

  • 10 months later...


  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...