Jump to content
SAU Community

Recommended Posts

Haing a clean up of what parts i still have after parting out my 32 gtr. also have some 33/34 and silvia parts too.

call or sms me (brad) on 0437 198 210

can get pics if needed.

pick up preferred from upwey or dandenong.

fairly frim on prices as they are cheap as it is. priced to sell asap. :cheers:

R32 GTR

Injector Resistor Pack $50

Oem Gtr Side Skirts (2 piece) $100 pair

Brake Booster $60

Brake Master Cylinder (abs) $80

Brake Booster Tank (bolts next to brake booster behind the strut tower) $30

Abs Unit $100

Power Steering Res $40

Power Steering Rack $100

Power Steering Pump $60

Lower Control Arms (both sides) $50each

L/H Front Driveshaft $100

Castor Rods (both sides with nolethane bush's) $80 pair

Front Sway Bar $30

Front Sub Frame $50

Front Hubs/Knuckels $50 each

Speedo Cable (same as gtst) $40

Acc Cable $30

Windscreen Wiper Motor $30

Windscreen Wiper Arms $10 each

Aircon Compressor and lines between firewall and condensor $80

Complete BOV + Return Setup (everthing from drivers side to the pass side inner guard $160

Clutch Master Cyclinder $30

Clutch Pedal $20

Brake Pedal $15

Acc Pedal $15

Centre Dash Vents $50

L/H Dash Vent $30

Stereo/middle Surround with Astray (shiny finish) $40

Cluster 41,510 km's $120

Cluster surround with Clock $40

Roof Lining (could do with a clean) $10

Factory Boost Gauage Map Sensor $15

Drivers Side Reversre Light $30

Pass Side Reverse Light (one of the mounts is snapped off ) $15

Cooler Piping

Drivers Side guard to manifold $15

Drivers Side Guard to Cooler (have 2 of these) $15

Pass Side cooler to Guard $15

Rear Brake Calipers $120 pair

Pass Side Kick Panel (covers ecu) $10

R33 and R34

R33 Rb25Det Throttle Body x 2 $40 each

R33 Rb25 Coilpack Cover $30

R34 Rb25 Coilpack Cover $30

R33/R34 GTR Airbox Guard Duct $30

R33 Rb25det Aftermarket Top Feed Fuel Rail (brand new never used, comes with adapters for conversion to top feed) $100

R34 Gtt Rb25det Exhaust Std Front Pipe $30

R33 Gtst Rear Brake Calipers $80 pair

R33 Gtst Intake Pipe(with bov return and rocker cover breather pipe) $20

R33 Rb25det Fuel Rail With Injectors $70

Silvia and others

S13 Sr20det Std Boost Solenoid $10

S13 Centre Console and Ashtray $15

S13 Ca18de Intake Pipe $20

S13 Sr20de Intake Pipe x2 $20

S13 Ca18det Airbox $100

S13 Sr20 Inatke Manifold (no injectors/idle motor) $40

S13/S14 SR20 Ignitor $50

S13/S14 SR20 Power Steering Pump $50

S13/S14 Sr20Det Std Injectors x4 $50

S13/S14 6 Bolt Drivshafts (pair) $50

S14 Speedo Cluster Surround Trim $20

S14 Sr20DET Radiator/Shrould/Thermo Fan (has a few dents and bent fins) $40

S15 6 Speed Manual Tailshaft $40

Soarer 1jz Std Exhaust Manifolds (pair) $40

350z Std Cats (low km) $80 pair

Link to comment
https://www.sau.com.au/forums/topic/394459-r32-gtr-part-out-left-overs-melb/
Share on other sites

  • 1 month later...
  • 9 months later...

*EDITED*

only have whats listed below, sold items deleted.

R32 GTR

Brake Booster Tank (bolts next to brake booster behind the strut tower) $30

Abs Unit $100

Power Steering Res $40

Power Steering Rack $100

Power Steering Pump $60

Lower Control Arms (both sides) $50each

L/H Front Driveshaft $100

Castor Rods (both sides with nolethane bush's) $80 pair

Front Sway Bar $30

Front Sub Frame $50

Front Hubs/Knuckels $50 each

Acc Cable $30

Aircon Compressor and lines between firewall and condensor $80

Centre Dash Vents $50

L/H Dash Vent $30

Stereo/middle Surround with Astray (shiny finish) $40

Cluster 41,510 km's $120

Cooler Piping

Drivers Side Guard to Cooler (have 2 of these) $15

Pass Side cooler to Guard $15

Rear Brake Calipers $120 pair

Pass Side Kick Panel (covers ecu) $10

R33 and R34

R33 Rb25 Coilpack Cover $30

R34 Rb25 Coilpack Cover $30

R33/R34 GTR Airbox Guard Duct $30

R33 Gtst Rear Brake Calipers $80 pair

R33 Gtst Intake Pipe(with bov return and rocker cover breather pipe) $20

Silvia and others

S13 Sr20det Std Boost Solenoid $10

S13/S14 SR20 Ignitor $50

S14 Speedo Cluster Surround Trim $20

350z Std Cats (low km) $80 pair

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...