Jump to content
SAU Community

Recommended Posts

Generally if you have entered you have entered a class. thosre tyres will be part of the class.

i.e. Im in 2B and allowed semli slicks, if I was to run slicks id be 2D. If I changed half way through Im sure my times woulkdnt count on slicks as I have entered without.

so basicallyits similar to superlap here eg i run a street tyre im in one class but can jump classes if i change tyres? is there even a class for cheap chinese tyres?

Yes and no.

Download the NSW superprint rules/regs first, don't start with general CAMs regs, there are massive compromises in the sprints rulebook to cater for the fact that road cars are permitted to run on a race track.

Start here:

http://supersprints....Provisional.pdf

Basically there are three types of tyres used in sprints

1. Road tyres

2. Semi-slicks

3. Slicks

Generally road tyres and semi-slicks can be used in types 1,2,3,SV and type 6 and slicks used in Type 4 and 5 (and SV in some cases, which essentially pushes you into type 4). It sounds like you'll be looking at Types SV or 6. You can find the definition / list of semi-slicks from for CAMS manual. Make sure to read the sprint manual to see where your car fits. The high level types are listed below (from the sprint rules/reg). Each type is split into several classes based on engine capacity. It's very easy to get involved in sprints and most people involved are pretty good. The guys who run the series will not want you switching classes willy nilly throughout the year however. You might be allowed to once or twice. The idea is to pick a class and contest it consistently.

Type 1 Unmodified Production Cars (excluding Four Wheel Drive

Turbos, Clubmans, Kit Cars and Replicas), where the only

freedoms relate to safety, engine reconditioning, tyres and

some cosmetic items.

Type 2 Modified Road-Registered Vehicles (excluding Clubmans,

Kit Cars and Replicas), allowing originally available options

and limited modifications to engines, suspension and tyres.

Type 3 Competition vehicles based on Group 3J - Improved

Production Cars rules as defined in the CAMS Manual.

Minor additional freedoms are allowed to recognise that

there will be some road-registered vehicles competing, that

cannot meet full 3J rules.

Type 4 Competition vehicles based on Group 3D - Sports Sedan

rules as defined in the CAMS Manual. In addition, any

vehicle that conforms to Type 1, 2, 3 or SV requirements,

apart from Clubmans, Kit Cars and Replicas, shall be

permitted to employ or use Race Tyres but if it does so it

shall be classified as a Type 4 vehicle.

Type 5 Clubmans, Kit Cars and Replicas (whether Road

Registered or not) using Race Tyres, Racing Cars and

Sports Racing Cars or as classified by the NSW Supersprint

Panel.

Type 6 Highly modified mass produced vehicles commonly known

as “Time Attack” vehicles that are modified specifically for

the performance of fast lap times and not for racing.

Type SV Road registered vehicles with no limit on modifications

Edited by LSX-438

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...