Jump to content
SAU Community

Recommended Posts

for sale is my series 1 jzx100

mod list

exceedy hyper single plate clutch with lightened fly wheel

cusco coil overs

series 2 tail lights

cusco strut braces

slotted rotors front stock rear rotors with endless brake pads all round

hdi front mount kit

hks super scilent exhaust with high flow front pipe

wheels are 19 inch avs model 7 powder coated white

apexi cold air intake brand new in box

blitz bov is plumb back atm but the adaptor is there to make it vent to atmo all brand new still have the box

car still retains the stock air box with hks pannel filter

i have polished the cam covers /throttle body /water out let/and intercooler outlet the j pipe and inlet manifold is done in black wrinkle coat centre cover is mat black went for a stealth look less cop hastle

the car has had full major service last week done water pump all idlers and tensioner /timing belt/spark plugs /coolant/all oils diff has motul gearbox has redline shock proof engine oil gets done every 6 months or 3000 kms car does not get driven much as i get a company car and the misses drives this to and from work.

spare parts that come with car are all left overs i have from a part out of another 100 i bought there is all 4 doors with most parts still in them there is a spare boot with wing all door class and rear windscreen /2 front seats /a spare series 2 dash with no lift /stock exhaust 3 spare 19 inch tyres spare rear bar that has gay fog lights in it series 1 tail light thats all i can think of atm

$17000 ono

phone 0409454739

post-39491-0-94503900-1332361505_thumb.jpg

post-39491-0-74836200-1332361520_thumb.jpg

post-39491-0-28648100-1332361533_thumb.jpg

post-39491-0-48028400-1332361548_thumb.jpg

post-39491-0-48922800-1332361559_thumb.jpg

post-39491-0-69598300-1332361596_thumb.jpg

post-39491-0-44257100-1332361611_thumb.jpg

post-39491-0-71882400-1332361622_thumb.jpg

post-39491-0-42051700-1332361642_thumb.jpg

post-39491-0-06142200-1332361659_thumb.jpg

post-39491-0-27079000-1332361680_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/395527-jzx100/
Share on other sites

Free bump for a very tidy, and nicely subtle car: makes me miss my Chaser! thumbsup.gif

What's the mileage?

Is it factory manual or converted?

If converted, does it have the Torsen LSD?

Link to comment
https://www.sau.com.au/forums/topic/395527-jzx100/#findComment-6284548
Share on other sites

car has 90 k on it i converted it to manual before x mass has torsen lsd out of manual chaser everything to do with conversion is out of a manual jzx100 pedals box diff tail shaft i went to the extream of putting the manual tunnel in it and manual ecu car retains the original cluster just has the manual black face on it as that is the only difference between the manual and auto cluster everything kept original

if anyone wants to check it out i am more then happy to throw it on a hoist at work and you can have a look

Edited by bernardshorty
Link to comment
https://www.sau.com.au/forums/topic/395527-jzx100/#findComment-6284579
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...