Jump to content
SAU Community

R34 Gtr Oem Parts

nick_7g
 Share

Recommended Posts

nick_7g Proficient

nick_7g

Posted
Posted

For sale are some OEM parts off my 1999 R34 V Spec. The car had about 90k kms on it when they were taken off, and I belive most were on for the duration.

All parts are stock standard OEM. And, they are the only parts I have for sale.

1. Used clutch - was slipping in 3rd and 4th, under stock power. Definitely needs rebuild (call Jim, he'll want a stocker swapper). Replaced with ORC twin - $250

2. Clutch line - does what standard clutch lines do. Replaced with Nismo - $20

3. Front and rear upper arms - in good condition (other than needing a wash). Replaced with Ikeya Formula - $250

4. Brake lines - helps the car not crash into things. Replaced with HEL - $30

5. Starter motor - makes a screeching noise after the engine has been turned over. Needs a rebuild, grease up, or swap with an auto electrician. Replaced wth working one - $100

Prefer Sydney pick-ups, but will post at the buyers expense. I will trade for an R34 front lip (not the diffuser, the middle lip). I will pay cash for one too.

Message me on 0407778421 if you want any info, or to tell me my prices are out of whack.

Nick

post-74691-0-48101200-1332415308_thumb.jpg

post-74691-0-77122500-1332415315_thumb.jpg

post-74691-0-66471800-1332415324_thumb.jpg

post-74691-0-65905700-1332415331_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/395612-r34-gtr-oem-parts/
Share on other sites
  • 2 weeks later...
nick_7g Proficient

nick_7g

Posted
  • Author
Posted (edited)

UPDATE

1. Used clutch - was slipping in 3rd and 4th, under stock power. Definitely needs rebuild (call Jim, he'll want a stocker swapper). Replaced with ORC twin - $250 Inspected and is worth more like $150

2. Used dual-mass flywheel now for sale - Will inspect condition and update. For now price = $250, may go up or down $50 depending on confirmed condition (will post pics)

(1.+2. Used clutch + flywheel = $350)

3. Clutch line - does what standard clutch lines do. Replaced with Nismo - $20 or free with any other purchase

4. Front and rear upper arms - in good condition (other than needing a wash). Replaced with Ikeya Formula - $250

5. Brake lines - helps the car not crash into things. Replaced with HEL - $30 or free with any other purchase

6. Starter motor - makes a screeching noise after the engine has been turned over. Needs a rebuild, grease up, or swap with an auto electrician. Replaced wth working one - $100

Prefer Sydney pick-ups, but will post at the buyers expense. I will trade for an R34 front lip (WANTED) (not the diffuser, the middle lip). I will pay cash for one too.

Message me on 0407778421 if you want any info, or to tell me my prices are out of whack.

Edited by nick_7g
  • 2 weeks later...
nick_7g Proficient

nick_7g

Posted
  • Author
Posted

UPDATE

1. Used clutch - was slipping in 3rd and 4th, under stock power. Definitely needs rebuild (call Jim, he'll want a stocker swapper). Replaced with ORC twin - $250 Inspected and is worth more like $150

2. Used dual-mass flywheel now for sale - Will inspect condition and update. For now price = $200

(1.+2. Used clutch + flywheel = $300)

3. Clutch line - does what standard clutch lines do. Replaced with Nismo - $20 or free with any other purchase

4. Front and rear upper arms - in good condition (other than needing a wash). Replaced with Ikeya Formula - $200

5. Starter motor - makes a screeching noise after the engine has been turned over. Needs a rebuild, grease up, or swap with an auto electrician. Replaced wth working one - $100

NEW ADDITION: 6. Standard silver R34 GTR front bar with mesh, indicators and GTR badge (no bottom lip) - $450

Prefer Sydney pick-ups, but will post at the buyers expense (not posting front bar though).

Message me on 0407778421 if you want any info, or to tell me my prices are out of whack.

  • 1 month later...
  • 3 weeks later...
nick_7g Proficient

nick_7g

Posted
  • Author
Posted (edited)

R34 GTR stock clutch - $100

Was slipping in 3rd and 4th, under stock power. Definitely needs rebuild. Replaced with ORC twin.

R34 GTR stock dual-mass flywheel - $200

R34 GTR stock Clutch line - $17.50 (or $20 shipped)

Does what standard clutch lines do. Replaced with Nismo.

R34 GTR stock front and rear upper arms - $200

In good condition. Replaced with Ikeya Formula.

R34 GTR stock starter motor - $100

Makes a screeching noise after the engine has been turned over. Needs a rebuild, grease up, or swap with an auto electrician. Replaced with working one.

R34 GTR stock silver front bar - $400

Front bar with mesh, indicators and GTR badge. Some scuff marks. No bottom lip. Not my bar, bought it for the bottom lip.

New addition

HKS Hipermax II (I think) coilovers - $450

Front two are fine, no dramas. Rear passenger also fine. Rear driver is not in great shape, and looks like it has been leaking. These were installed in 2006, and I have the Japanese receipt (might try and send back to HKS for warranty). Will require a rebuild, which I am assured Grizzly Dyno Shocks in Baulkham Hills can do (call (02) 9686 4873 for a quote). Replaced with Bilsteins.

I am open to offers, prefer Sydney pick-up on front bar. Call or SMS Nick on 0407778421, or PM me.

Edited by nick_7g

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...