Jump to content
SAU Community

Recommended Posts

  On 19/01/2013 at 9:35 AM, Zorro said:

Guess this is the place for a Name n Shame/bitch about others driving!?!

******** R33 GTST Silver, Sth Rd this morning, said skyline driver pulls some fn stupid overtake & lane change, blindly across 3 or 4 lanes of traffic & straight into the side of my 7, slammed brakes mega ABS action, just touched the curb (slight mark on tyre only) & he missed the front of my car by barely mm's; I honestly thought I was going to PIT manoeuvre him. I naturally after recovering & taking in my Mad Skillz & luck, beeped & flashed headlights, then pull along side & gave the dude wtf, you were this close to a really bad day & use your fricken eyes type signal, & the SOB had the audacity to give me the finger! So, if this is you or you know of this guy, please politely inform him that that is seriously not cool & to pull his fn head in! If you/he wants to drive like a total muppet, do it along way from me ,or next time it wont be a friendly message on a forum! *( one of my first customers today was one of the sergeant's from sturt, I was going to tell him, but decided to try to pass the message on to him/you via our car community first!)

Check Registration Expiry Date

Registration Details

Plate Type ALPHANUMERIC

Plate Number *******

Make NISSAN

Body Type SEDAN

Primary Colour SILVER

Expiry Date ********

The vehicle registration is either suspended or the vehicle is stolen, defected, or has a writeoff incident recorded.

Please contact Service SA on 13 10 84 for more information.

Interesting!!!

Edited by SLED

What'd to stop done idiot from posting someone's rego details on here because they don't like them or don't know the road rules.

I had a alteration with done muppet a while ago who tried to change lanes on me, I hit the horn and he hit the roof, he was under the impression that because he wanted to change lanes and I was in his way I should move, I'm quite happy to let people in when I have more warning than a car turning into the lane I am currently occupying.

He could post that I cut him of and post my rego details for all to see.

If you have been done hard by go to the cops, don't cry and post rego details on a forum as I see it will do no good.

Do you want your rego details posted up about alleged activities that may or may not have happened.

  On 20/01/2013 at 1:52 AM, mlr said:

What'd to stop done idiot from posting someone's rego details on here because they don't like them or don't know the road rules.

lol coherent much? Im the idiot? Really? Why dont you just STFU & mind your own business Mark. I posted it because, it is a concern to our community & it happened exactly the way I explained it! I was just cruising along in my lane, minding my own business & said muppet pulls that shit. I dont know the guy, so its not a matter of not liking him & I know the road rules, he broke many of them! If he had just acknowledged it and given the 'yeah sorry it stuffed up' wave or something, I more likely would of given the, 'shake head' & let it go; but he didnt, and its that attitude, that is only going to create problems for everyone. Im not crying, I just tried to let the skyline community know & with some luck the guy himself!

Hey, look at all the posts before mine, carrying on about a video & other drivers! Also, look at the title of this thread & its SA, not NSW matey!

But hey, if this is how we want stuff to be handled these days then fine, lets all just dob everyone into the cops everytime something even remotely interesting happens (not that they would do anything).... everyone all praise the nanny state (& stupid people)!!!

PS: I dont suppose you noticed his car is either unrego'd, stolen or defected? That is what I found to be even more of concern!

SLED/Pete, do what ever you have to mate. also, in the interest of transparency & honesty, the number plate from the original post is still visible too. :).

Edited by Zorro

pfft settle down mate. all mlr was pointing out is its not the best idea to post someone personal details and slander them on a public forum.

and that whinging about bad drivers is like throwing pennies in a wishing well, it achieves nothing.

  On 20/01/2013 at 7:17 AM, Zorro said:

lol coherent much? Im the idiot? Really? Why dont you just STFU & mind your own business Mark. I posted it because, it is a concern to our community & it happened exactly the way I explained it! I was just cruising along in my lane, minding my own business & said muppet pulls that shit. I dont know the guy, so its not a matter of not liking him & I know the road rules, he broke many of them! If he had just acknowledged it and given the 'yeah sorry it stuffed up' wave or something, I more likely would of given the, 'shake head' & let it go; but he didnt, and its that attitude, that is only going to create problems for everyone. Im not crying, I just tried to let the skyline community know & with some luck the guy himself!

Hey, look at all the posts before mine, carrying on about a video & other drivers! Also, look at the title of this thread & its SA, not NSW matey!

But hey, if this is how we want stuff to be handled these days then fine, lets all just dob everyone into the cops everytime something even remotely interesting happens (not that they would do anything).... everyone all praise the nanny state (& stupid people)!!!

PS: I dont suppose you noticed his car is either unrego'd, stolen or defected? That is what I found to be even more of concern!

SLED/Pete, do what ever you have to mate. also, in the interest of transparency & honesty, the number plate from the original post is still visible too. :).

Please reread my post, did I name you as the idiot, I think not, I was just stating that posting information that may or may not be true can still be interpeted as slander.

And thank you for reminding me where I live, I'm sure that slander is fine in SA, but in the end I will STFU as you requested as you must have a lot more knowledge on the law than me.

Happy days.

Settle down guys.

Unfortunately everything said in this thread is merely heresay....so it counts for nothing really because I'm sure the other party will always have their version of events.

For this very reason I think this thread is useless and I'm contemplating shutting it down.

  On 20/01/2013 at 10:13 AM, mlr said:

Please reread my post, did I name you as the idiot, I think not, I was just stating that posting information that may or may not be true can still be interpeted as slander.

And thank you for reminding me where I live, I'm sure that slander is fine in SA, but in the end I will STFU as you requested as you must have a lot more knowledge on the law than me.

Happy days.

you took that well mark :/

I think your spot on Pete

Well i assumed you called me an idiot, can barely make sense of your drivel & now your calling me a fool too; you got a way with words Mark i will give you that!

Pete, shut this crap down, its clearly not doing what is was supposed too!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Haven’t had the chance to drive it yet with work being a nightmare, will definitely be doing that at some point this week. got these so that grip won’t be an issue at roll racing  
    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
×
×
  • Create New...