Jump to content
SAU Community

Putty Road Cruise Tomorrow Newcastle Meet Point (For Full Cruise)

Ruxis

By Ruxis,
in Events Archive

 Share

Recommended Posts

Ruxis Veteran

Ruxis

Posted
Posted

hey guys

Lots on confusion going on for the Newcastle boys and where we're meeting and who's doing the full cruise etc.

So I thought I'd throw this up for anyone interested in the full cruise.

Me and ant123 are meeting at Shell petrol station thomas street wallsend syd bound at 730 to leave at 745 to meet everyone at the official meet point.

If anyone is keen, say so in here and well expect to see you. (if your late we can't hang around all day for you)

My number is 0421551710, if you need to contact me I'll be awake at around 630 so text or call.

Jarrad.

m.j.h Mentor

m.j.h

Posted
Posted

I thought the two meet points were

Glendale Maccas at 730 for the drive down to Windsor for the full cruise

OR

Warners Bay Maccas at 10.30? for the partial cruise join up at singleton way

That's what I got from the other thread anyways

GTR-34A Mentor

GTR-34A

Posted
Posted

Yea we were but me and Jarrad were thinking no one was coming so didn't want to go out of our way for nothing... Post up eoi here if your keen to go down to Windsor in the morning

Ruxis Veteran

Ruxis

Posted
  • Author
Posted

Wasn't us that changed the meet point in the first place and there was to much confusion going on.

Plus, me and ant are up in the city more and it's just out of the way to go to Glendale if no one is going which it seems that's the case.

Not to phased if no one comes, The meet up is In syd just figured if someone was lost in confusion and wanted the whole cruise they could come with us to give te freeway a better view.

No need to get upset about it were both pretty flexible If someone had a problem

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...