Jump to content
SAU Community

Recommended Posts

  • Replies 151
  • Created
  • Last Reply

Top Posters In This Topic

  • 4 weeks later...

Bump

New parts:

Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120

S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180

S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250

S14.5 Origin +25mm conversion fenders (brand new) $450

S14 Origin +50mm rear fenders (brand new) $450

S14 light weight fibreglass doors (brand new) $900

S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,050

S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100

used parts:

Greddy engine oil cap $40

S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550

S15 factory rear boot spoler with led's, pewter colour $120

S15 JDM factory steering wheel with airbag $250

S15 Hybrid aluminium radiator $250

S15 Stage21 aero front bar (painted blue) $350

S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300

S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3200 (new price from PWR is $4300)

S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700

C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100

Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,750 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body).. save over $800 off new prices

HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300

STACK 8130 dash with sensors and loom $1,800

ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono

R34 GTR Cusco Type-40 aluminium strut tower brace $240

R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750

R34 GTR C-west carbon fibre cannards for N1 bar $350

R34 GTR Nismo dash cluster (black version) (brand new) $700

R34 GTR/GTT Nismo GT LED tail lights $1,200

4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1300

RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,200 firm

RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800

RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000

SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100

** can post wheels interstate if needed at buyers cost **

still for sale!

New parts:

Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120

S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180

S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250

S14.5 Origin +25mm conversion fenders (brand new) $450

S14 Origin +50mm rear fenders (brand new) $450

S14 light weight fibreglass doors (brand new) $900

S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,050

S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100

used parts:

Greddy engine oil cap $40

S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550

S15 factory rear boot spoler with led's, pewter colour $120

S15 JDM factory steering wheel with airbag $250

S15 Hybrid aluminium radiator $250

S15 Stage21 aero front bar (painted blue) $350

S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300

S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3200 (new price from PWR is $4300)

S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700

C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100

Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,750 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body).. save over $800 off new prices

HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300

STACK 8130 dash with sensors and loom $1,800

ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono

R34 GTR Cusco Type-40 aluminium strut tower brace $240

R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750

R34 GTR C-west carbon fibre cannards for N1 bar $350

R34 GTR Nismo dash cluster (black version) (brand new) $700 sold

R34 GTR/GTT Nismo GT LED tail lights $1,200

4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1300

RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,200 firm

RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800

RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000

SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100

** can post wheels interstate if needed at buyers cost **

bump!!!!! Rawwwrr.. buy my shit!

SimonR32 sent you a pm buddy. Not really keen to send interstate, i don't have time to arrange the freight etc. Let me know

Hahaha. Indeed.. But try dealing with 500 low ballers then you may understand the frustration that comes with selling parts on forums.. not so much SAU, but always on nissan silvia.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...