Jump to content
SAU Community

Finally i own a sky again :) R32 GTR

Shrub32

By Shrub32,
in South Australia

 Share

Recommended Posts

Shrub32 Proficient

Shrub32

Posted
Posted

After a very long wait my car is finally in my hands, now for regency :headspin: anyways while my car was in transit the CD deck and climate control were stolen, most likely here at the docks! Now i was half expecting the deck to be taken but the climate control face........comon warfies!!!!!!! something has to be done about those guys as this is rampant down there so says a inside source i know. so now i have to ring around and find a new climate control face for a R32, unless anyone out there in sau land has one or knows of one lying around?

letme know

cheers :)

Brad

Link to comment
https://www.sau.com.au/forums/topic/39854-finally-i-own-a-sky-again-r32-gtr/
Share on other sites
COPYME Collaborator

COPYME

Posted
Posted
After a very long wait my car is finally in my hands, now for regency  :headspin:  anyways while my car was in transit the CD deck and climate control were stolen, most likely here at the docks! Now i was half expecting the deck to be taken but the climate control face........comon warfies!!!!!!! something has to be done about those guys as this is rampant down there so says a inside source i know. so now i have to ring around and find a new climate control face for a R32, unless anyone out there in sau land has one or knows of one lying around?

letme know

cheers :)  

Brad

Try Japanese Auto Imports behind Holden Hill Cop shop, was in there today and they had a lots of dash components on shelfs behind the counter. I know some warf workers & if your going to bring stuff in then its best you know one or two.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...