Jump to content
SAU Community

Swap// Hks Priest Exhaust

miga24
 Share

Recommended Posts

miga24 Enthusiast

miga24

Posted
Posted

Hey guys, I have a HKS Priest Exhaust on my R33 at the moment. it gives the car a very nice pur and a good growl when you step on it. it looks nice and its not a straight cannon

im looking to swap it to a more quiet and stock sounding exhaust that is not exactly stock looking, if anyone has a quiet exhaust and is interested please pm or msg on 0415066166

thanks

post-50434-0-18394100-1335820510_thumb.jpg

post-50434-0-59080300-1335820515_thumb.jpg

post-50434-0-86132000-1335820526_thumb.jpg

post-50434-0-47771500-1335820556_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/399048-swap-hks-priest-exhaust/
Share on other sites
85URK Grand Master

85URK

Posted
Posted

I had a HKS Preist exhuast on my gtr before i sold it for a cannon style rear. I actually Though it was a decently quite exhuast system for its size, and had a great note when u gave it some revs. but wasnt too loud at all. You must want a really quite exhuast then. Good luck with the sale, its a good quality exhuast and im sure you will find a trade with somebody who is looking to upgrade but not go too loud :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • Dose Pipe Sutututu
      RB25DE NEO with Haltech ECU

      By Dose Pipe Sutututu · Posted

      post up screen shots of your injector tables
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • feartherb26
      RB25DE NEO with Haltech ECU

      By feartherb26 · Posted

      I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...