Jump to content
SAU Community

Recommended Posts

All parts are from a series 2 97 r33 gts manual. Had a impact in the front but fixable with a dressed front cut. It is fixable but I have decided to strip it. Just ask if you need something not listed. I will post most items. If its bigger I may get you to source your own courier. I can find at least one day a week I can meet a courier.

Also if you need something and the price is honestly a bit steep don't be afraid to have a chat to me about it. That doesn't mean I want to be low balled on everything but id like to think im fair and reasonable. If you disagree however please don't comment on that lol. If you would like pics please let me know. Il try and get pics tonight of the non standard gear.

Manual Conversion

Series 2 sunroof shell. Currently rolling with manual conversion installed. 3k Can be negotiated as to how much i remove or keep there. on repariable write off register

Full series 2 interior

Front seats

rear seats

COMPUTER $100

TAIL SHAFT $200

R200 WITH CRADLE DIFF IN VGC $250 ABS diff

Abs pump

DRIVESHAFTS $65 EACH

HICAS $80

POWER STEERING RACK $150

POWER STEERING BOTTLE $20

BRAKE MASTER CYLINDER $150

SWAY BARS $20 EACH

Horn $20

Front wiper motor - $50

Rear Wiper Motor - $50

STEERING COLUMN $50

(Body parts)

series 2 headligtht Passenger side 175

Passenger front guard $50 very slight mark

Drivers door 300

Pass door $300 includes glass window reg and everything

Boot very minor damage to rear drivers side lip. $60 no wing

Rear tail lights

(DASH PARTS)

turbo cluster with 167000km's $150

DASH NO CRACKS OR BUBLES OR HOLESLOOKS LIKE NEW with airbag $300

ALL VENTS $75

GLOVE BOX $30

CENTRE CONSOLE $150

CLIMATE CONTROL UNIT $75 BOTH BUTTONS WORK

HEATER CORE $70 A

IRCON CORE $70

HEATER FAN $20

(INTERIOR)

INDICATOR / WIPER SWICH Headlight, fog lights / ASSEMBLY $100

HANDBRAKE $30

REAR TRIMS $30 EACH

SEAT BELTS SET $150

INTERIOR LIGHT $15

PLUSH CARPET $70

PASSENGER DOOR TRIM $75

POWER WINDOW SWITCH PASS SIDE $25

BOOT TRIMS $70

POWER ANTENNA $50

PILLER TRIMS $20 EA

ROOF LINING $40

KICK PANELS $10 EACH

R33 GTST. Skuff plates, both sides $35

Rear Seats - $100

Door seals $25 each

Boot seal $25

Rear ¼ trims - $50 each

Rear1/4 window surrounds $50 each

A pillar Trims $20 each

B pillar trims

Door cards

Rear Vision Mirror $20

(ODDS AND ENDS)

FUEL TANK $30

FUEL PUMP $50

WASHER BOTTLE $20

RADIATOR OVERFLOW BOTTLE $20

WINDSCREEN $200

QUARTER GLASS $30

REAR WINDOW $200

BATTERY HOLDER $20

WIPERS $15

FUEL LINES $50

FUEL FLAP $10

FUEL CAP $10

Engine Mounts - $80

Radiator overflow bottle - $20

Stock BOV - $40

Sun visors $30

Handbrake assembly & cables - $160

Sing out if you need anything not listed. PM me or get me on 0424506009

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Hey mate, If you cant sell the Shell whole, I may be interested in the sunroof glass part. Not the whole sunroof just the glass bit, but I might be prepared to buy the whole lot.

Let me know if your interested

I have alot of other parts not listed so dont be scared to ask. Also if prices are steep im happy to negotiate. Also do bulk prices on several items. Sent lots of stuff to wa and sa so far, will post most items.

Will sell sunroof roof lining, light / switch, right or left rear body cut. aps pump unit thing. na steering rack and lines, na cross member, rear bar, aftermarket catback exhaust, 17" 4 stud wheels, Right or left tail light. Airbox with k&n filter + snorkle, green lable afm, na intake pipe from airbox to tb. Series 2 airbag steering wheel or airbag from dash.

Will take 900 firm for manual conversion. Its in the way!

Edited by coaster

yep sure do mate. 0424506009. ur welcoem to ceh k out otehr bits as well.

I actually just bought a turbo wreck. yet to get it delivered though.

Hey,

Got these pipes/hoses?

Also the f###ing crows have been eating the rubber around the door/windscreen so do you have a gun? Whoa, a mean do you have the drivers side door rubber forsale?

Cheers

Simon

(Oh and ive just discovered the joys of image paint, hence the yellow lines!!!)

post-76251-0-37282400-1339207344_thumb.jpg

post-76251-0-71693700-1339207361_thumb.jpg

post-76251-0-30311200-1339207398_thumb.jpg

post-76251-0-23143200-1339207815_thumb.jpg

Edited by simdog

hey mate, good pics!makes it really easy to locate stuff.

I am fresh out of guns and dont have alot of the stock turbo pipes but il have a look. should have most or all of the rubbers you need. Let me know when u want to come check them out.

I actually just bought a turbo wreck. yet to get it delivered though.

Oooh, keep me updated. I'm still chasing an RB25DET. I might also get around to grabbing that door card bracket too :P

Hey

Have you got any of those plastic clips that screw in? they are manly found in the boot area? i have not many and sub is currently holding the backing up. and also a lid for the windscreen wipers container? or complete unit would be fine.

thanx l8rs

  • 2 weeks later...



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...