Jump to content
SAU Community

Recommended Posts

it's a blow off valve... sits just before the throttle body on the R33 inlet pipe. It has some pipe that comes off the outlet and goes back in down near the air filter before the turbo, but after the air flow meter. It also has a small hose that goes to the inlet plenum that opens the valve when you take your foot off the accellerator

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

BOV = Blow off Valve; Basically it either releases (atmo) or re-directs (plumb-back) the pressurised air from the inlet pipes when off throttle....

in more detail:

atmo; sends the pressurised air out of the intake pipes to the atmosphere (goes wooosh... lol)

plum-back; puts the air back through the turbo.....

i thinks that's about right.... if any one wants to elaborate you're more than welcome....

OK...I said it was a stupid question!!! So i take it that the fluttering sound is bad and that i should look into fixing it.....however my blowoff valve sound like it is working OK. Also sometimes when i apply full load to the engine, my car kinda stutters and jutters and then fangs....

sounds like pinging.... dyno's are great to test all that.... most likely something simple....

as for the BOV, you can tighten them to only go off above certain pressures/revs...I've done that with mine, which makes it flutter under about 3500 RPM then go whooosh above....

R33_BO:

It sounds like you have a BOV that vents into the atmosphere. This means that when you change gears and alike your BOV realises air outside the air intake, which means that your engine thinks you have more air in the air intake then there actully is. It does this through your AFM (Air Fuel Meter, the thing Connected to your air Filter - black box thing). Not all cars have these so they can run atmospheric BOV's but unfortunatly Skylines do...

You should look into getting a stock BOV on your car and all should be fine if the BOV is your problem...

It could be other things, dirty AFM etc...

my car makes the fluttering sound just recently... it just happened after i upgraded my air filter form the standard box.. beofre i did change the air filter to a trust (airinx), it was just making thew woooshhh sound... now with the filter on, it goes tshh tshh tshh tshh... is that a bad thing?

Guest INASNT

the flutter is ok, but if u want to be fully sick and have the dut dut dut dut sound then get a nice big turbo like a 3040 run it at around 1 bar with no bov at all and u will be fully sick. I did this with mine for about 2 weeks till i found my gtr bov's. It sounds good but farks the turbo bearings and tip of the comp wheel if u run like that for a long time.

Just like everything else u will get bored of the fully sick sound after awhile

the sound youre hearing is not caused by the pod filter, but you can hear when you fitted the pod because standard box filters the noise. The flutter noise is caused by either you've blocked your bov, or you have an aftermarket bov setup with a hard spring, causing compressor surge.

my car makes the fluttering sound just recently... it just happened after i upgraded my air filter form the standard box.. beofre i did change the air filter to a trust (airinx), it was just making thew woooshhh sound... now with the filter on, it goes tshh tshh tshh tshh... is that a bad thing?

How does it go again?

the sound goes woosh shh shh shh shh... Never stalled on me, and no idle problems or nothing.. People say on the nissan silvia forums that the flutter sound is becuase when u take ur foot off the accelarator the turbine wheel spins backwards thus cutting back through the air making the flutter sound, or something like that iforgot exactly.. im so confused now lol..

mate the wheel will not spin backwards. It may slow down do to the pressure applied but turbo rewind is a myth. Think about it ur turbine is spinning over 10,000rpm for max .5 seconds when u change gears it won't cause the wheel to slow down to a halt then start spinning backwards in that amount of time. There was a really good article on autospeed about it was ages ago tho.

that's why the skyline forums is better than the silvia forums... cos at least here we know what we are talking about!!! :P

What happens is the pressure wave reflects off the closed throttle and back towards the turbo. When it reaches the turbo, the spinning wheel chops the pressure wave (also referred to as compressed air). That is the sound you hear. It could also be you BOV opening and closing (like mine does)... unless you have removed it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, new members can't post pics until they reach a certain post count. If I get a chance I'll promote you to full member, if @Prank or someone else doesn't get there first.
    • Drilled the rubber out on a slow speed and it didn't catch much at all. Probably only half a dozen holes was enough to shred the rubber and it dropped off easily leaving the inner sleeve behind. Will tackle that later
    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
×
×
  • Create New...