Jump to content
SAU Community

Recommended Posts

Hey,

For sale is my 1982 skyline dr30. Its a quick car and would make a great daily/tack or drifter. It comes with a rwc and has about 5 months rego on it. The engine in it is a fj20et, has a bigger turbo, waste gate, bov, Haltec ECU and puts out 290rwhp. The car has run a 12 second pass on a different suspension set up. Has mesh wheels with almost brand new tyres and no rust! Interior is very clean with an almost prefect dash and centre console and nardi steering wheel! Has adjustable coilovers in the rear and stiff springs in the front.

Im somewhat neg on the price so hit me up. I will look at swaps aswell, pretty keen on a rotary or a datsun (1200, 1600, 510 ect...) or an ae86, anything else feel free to offer worst I can say is no, but please be sensible with the offers. This car would make a perfect drift car or track car; hasn't been thrashed or tracked before.

Number plates will probably come with the car as I have no use for them. The car will have roughly 5 months rego and a RWC. I also have a box of spares to go with the car worth about 500$.

If you have any questions feel free to contact me on 0406756553 or via pm.

Thanks.

post-78758-0-50076100-1337407697_thumb.jpg

post-78758-0-54726800-1337407705_thumb.jpg

post-78758-0-74637900-1337407713_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...