Jump to content
SAU Community

Recommended Posts

Hey,

Long time lurker here on SAU...

Finally picked up my own Skyline yesterday, a black R32 GTR.

Will have picks soon, need to find some daylight!

Just a question out of curiousity..

It has HKS coilovers, I am looking at purchasing a coilover wrench to adjust them.

To lower it, do I need to take the coilovers out or can it be done from the engine bay/boot?

Pretty new to coilovers usually only had springs/shocks in previous cars!

Thanks

post-81745-0-61279400-1337515329_thumb.jpg

post-81745-0-12332200-1337515339_thumb.jpg

post-81745-0-51163600-1337515468_thumb.jpg

Edited by ls128
Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/
Share on other sites

So they aren't just adjustable from the strut top (i.e engine bay or boot?)

I don't really have the knowledge to take coilovers out without f###ing something up!!!

I forgot to mention theyre HKS Coilovers

from the top, the adjustments will be just to dampener settings.

Taking the coilys out is surprisingly easy; I surprised myself when I swapped mine over that I didn't f**k it up :P Basically you jack the corner up and put it on stands, take the wheel off, and there's one big bolt that holds the bottom of the coilover to the axle, and then the three bolts in the engine bay, and bam out it comes :) but I can understand the hesitation, definitely. Shit if you weren't in the Shire I'd come take a look; a bit far to go after work and I get busy on the weekends going down to the gong heh

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6365139
Share on other sites

from the top, the adjustments will be just to dampener settings.

Taking the coilys out is surprisingly easy; I surprised myself when I swapped mine over that I didn't f**k it up :P Basically you jack the corner up and put it on stands, take the wheel off, and there's one big bolt that holds the bottom of the coilover to the axle, and then the three bolts in the engine bay, and bam out it comes :) but I can understand the hesitation, definitely. Shit if you weren't in the Shire I'd come take a look; a bit far to go after work and I get busy on the weekends going down to the gong heh

Ah true - I thought so.

So it's not possible to take the wheel off and adjust from there?

I have a few mates who are mechanics, but I don't wanna go to low and screw my handling!

Also after a R32 Gtr front grill - colour doesn't matter, I can paint it. Looked through parts for sale only found one, PM'd him but no reply.

Edited by ls128
Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6365225
Share on other sites

Hmm, trying to remember if it can be done, probably? Someone else could probably give a 100% answer on that. But I think it should be able to be done :) As long as you get the spanners to undo the locking rings, it's worth a shot, just make sure you measure how much further you move it so that you can do it to the other side the same.

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6365441
Share on other sites

Hmm, trying to remember if it can be done, probably? Someone else could probably give a 100% answer on that. But I think it should be able to be done :) As long as you get the spanners to undo the locking rings, it's worth a shot, just make sure you measure how much further you move it so that you can do it to the other side the same.

Alright thanks mate.

Yeah, looking on ebay for a C spanner...I haven't been able to find one locally (not that I have put heaps of effort into looking)

I haven't actually properly looked at the coilovers yet, do they usually have the model visible with the wheel on? Or is it a matter of removing the wheels and getting right into the wheel well to know what model of HKS coilovers they are..

Yeah, I really just want to see how low down it does go haha

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6365808
Share on other sites

  • 1 year later...

Alright thanks mate.

Yeah, looking on ebay for a C spanner...I haven't been able to find one locally (not that I have put heaps of effort into looking)

I haven't actually properly looked at the coilovers yet, do they usually have the model visible with the wheel on? Or is it a matter of removing the wheels and getting right into the wheel well to know what model of HKS coilovers they are..

Yeah, I really just want to see how low down it does go haha

some coilovers are easily identifiable by sight (Ohlins, Bilsteins etc) but for most Jap coils, they have a model and then variations: Cusco Zero 1,2, 2e, 2r etc etc.

Best if you get us pics of your coilovers, but to do that you'd need to take the wheel off to get a decent pic anyway, so you might just find the model on!

also - Owen, are you serious that's all it takes to remove a damper?!?!?

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6878672
Share on other sites

Alright thanks mate.

Yeah, looking on ebay for a C spanner...I haven't been able to find one locally (not that I have put heaps of effort into looking)

I haven't actually properly looked at the coilovers yet, do they usually have the model visible with the wheel on? Or is it a matter of removing the wheels and getting right into the wheel well to know what model of HKS coilovers they are..

Yeah, I really just want to see how low down it does go haha

Remember if you go low the car becomes a defect magnet and it will also handle worse!

If you change height in any way make sure you get an alignment!

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6878675
Share on other sites

Remember if you go low the car becomes a defect magnet and it will also handle worse!

If you change height in any way make sure you get an alignment!

Oh how much i've learnt since this post last year!

Worked out they are HKS Hyper-D.

The thread on the coilovers is rusted so cant be lowered without taking the coilover out of the car, which is well effort :)

I've put up a build thread in the projects section!!

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6879746
Share on other sites

Oh how much i've learnt since this post last year!

Worked out they are HKS Hyper-D.

The thread on the coilovers is rusted so cant be lowered without taking the coilover out of the car, which is well effort :)

I've put up a build thread in the projects section!!

Good work :yes: I love a good build thread :woot:

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6879786
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...