Jump to content
SAU Community

R33 Gtr Wheels And Generic Jap 17S With New Tyres - Adelaide

rb2534
 Share

Recommended Posts

rb2534 Rising Star

rb2534

Posted
Posted (edited)

First Set of wheels

17x9 R33 GTR Wheels for sale, bought these approx 12 Months ago with brand new front tyres and good second hand rear tyres fitted. Recently fitted new rear tyres and probably only done around 1000ks as I don't drive my car all that much. Tyres cost me $400 and still have receipt.

One bit of gutter rash done on the front left due to a tall curb while parking, the rest have no rash. Quoted by Adelaide wheel and tyre $200 to fix. They were sprayed silver when I got them and I planned to get them stripped and powder coated properly but I have been offered some 34 GTR wheels which I would like to snap up.

Located in Adelaide and can send pics of gutter rash to interested people but honestly its not that bad, better than the ones Sinergy motorsport had for sale a while ago and they were asking the same price as these ones I had.

Asking around $1500

Second set of wheels

These are called Vagio's, sort of a twin 5 spoke wheel that were on my car when I bought them. Been sitting in storage for ages and the tyres are half decent from memory. I also have to go with the tyres 4 x 17 inch tyres which were fitted to another car, driven on for half a day then removed for wider rims to go on. I paid $100 a tyre for these and they still have the little fury bits on the edges

Asking $600

Or if someone wants both sets take them away of I will deliver them in SA for $2000.

Will post interstate and will happily help to arrange freight at buyers cost

Edited by rb2534

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...