Jump to content
SAU Community

Holinger 6Spd Sequential

GTR600

By GTR600,
in Wanted to Buy

 Share

Recommended Posts

Risking Grand Master

Risking

Posted
Posted

Anyone can buy direct from hollinger

Phone then up, order the ratios you want, pay a deposit and wait in the 8week line.

They turned one out for me in 5 weeks not long ago.

Better off buying a new one as there is a revised position indicator which is far more reliable than the old ones, you know the condition it's in and they offer a really good service rate if you deal with them direct.

Lee is very helpful just call up and explain what you want.

Risking Grand Master

Risking

Posted
Posted

19k plus gst.

Holinger have a fixed price. Doesn't matter how many you buy, in the trade or not that's the price

You will also require a clutch (original thrust bearing and fork can be used) fabricated gear box mount for it (holinger uses an ear type locator)

Ignition cut gear knob. Don't buy the hinger click type selector. Buy a strain gauge locally made shifter they are widely used in supercars and work far better.

Nissan tail shaft will work but we usually make a solid shaft.

Budget a transfer case rebuild while it's off.

Bellhousing bolts are also different and hollinger don't supply the correct length.

Bolts that hold the transfer case to the gearbox case are also shorter.

There is alot of small things that are different

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...