Jump to content
SAU Community

Recommended Posts

Item 1:

Forsale: Soundstream SW-12SE Arachnid Series 12" Subwoofer x 2 (DUAL)(With Sony Dual Enclosure)(Plug n Play)

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up, No Post Due of Size

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Used (As New), Good Condition

Price & Condition: $300 Negotiable

Details:

12" Dual 4-ohm Arachnid Series Subwoofer

- Power Handling:

Peak: 500 watts

RMS: 250 watts

- Black zirconium coated injection cone woofer

- NBR Rubber surround

- Vented pole piece for added heat dissipation

- Nickel Plated 8ga. Compression Wire Terminal

- Suspension integrated tinsel leads

- Silver Texture Coat Finish on Stamped

- Poly cotton spider

- Stamped steel basket

- 2" KSV Kapton voice coil

- Sensitivity: 85 dB

- Mounting Depth: 5.125"

http://www.soundstre...rs/arachnid.htm

Pics:

sideofsub-1.jpg

frontofsub-1.jpg

IMAG0612-1.jpg

backofsub-1.jpg

************************************************************************

Item 2:

Forsale: Defi Link Advance CR Meter (Boost Gauge) White + Defi-Link Control Unit II (Complete wiring, solenoid)(Plug n Play)(Packaged)(Genuine not copy)

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up, Post (At Buyers Expenses)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Used (As New), Good Condition, Working before pulled out of the car

Price & Condition: $350 Negotiable (The Lot) (Normally $275+ for the gauge alone without the controller)

Details:

Defi Boost Gauge Details:

-Display Unit: -100kPa ~ +200kPa

-Interactive communication advanced system is implemented.

-Flat glass and precise graduation scale give more needle accuracy and high visibility.

-Gauges can be controlled from distance with the included switch unit.

-Opening and closing modes can be selected from 2 variations.

-The illumination at night (I had it on Green Colour Setting)

-The needle pointer driven by original stepping motor has a smooth instantaneous response to rapid acceleration of high performance vehicles.

-The microcontroller calibrates up to 270 degree angle in 3027 - 4600 segments (0.088°- 0.059°), and provides accurate vehicle information.

-Self-diagnosis system turns the warning LED on to indicate any wire disconnection, short circuit and serial communication errors.

-Warning by buzzer sound when the warning LED is on (buzzer sound can be turned on / off).

-Peak value and warning value during driving are stored. Driving data can be stored and replayed up to 3 minutes.

-A mounting bracket, meter cup, regular position bezel are provided with this product.

Defi-Link Control Unit II Details:

Defi-Link Control Unit II is a necessary controller to install Defi-Link Meters, Defi-Link Meter BFs, and Defi-Link Displays. Up to 7 gauges and displays can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System."

Control Unit II Version 2.0

Parts NO.DF05002

Defi-Link System allows gauges and displays to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.

Links: http://www.defi-shop.../summary_unit2/

http://www.defi-shop...it2/spec_unit2/

http://www.ebay.com....f#ht_1132wt_901

Pics:

defiunit-1.jpg

defiboostgauge-1.jpg

556955_10151727436520066_625960065_24044144_1136272968_n.jpg

************************************************************************

Item 3:

Up for sale is

- Honda Civic FD 2006-2010 double din dash (Brand new $215) - $160 ono

- Kenwood DDX8039 Multimedia (7"Wide Double-DIN Size Monitor with Radio / DVD Audio / DVD Video / WMA / MP3 / DiVX / AAC Receiver / USB + iPod connectivity) - $450 ono

Pick up from Georges Hall NSW or postage at buyer's expense.

Call or sms 0412 189 219.

Pics:

27052012054-1.jpg

27052012055-1.jpg

27052012057-1.jpg

IMAG0747.jpg

*********************************************************************

Item 4:

Forsale: Polished Front Strut Brace (Bar) for MKIV Toyota Supra

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up, Post (Buyers expenses)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Used, Good Condition

Price & Condition: $60 neg

Pics:

WP_000162.jpg

WP_000161.jpg

WP_000160.jpg

WP_000159.jpg

********************************************************************

Item 5:

Forsale: Hi Flow RB25Det/VG30 Turbo with Dump Pipe and oil braided line

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up (only Due of size and weight)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Might need rebuild. Unknown Issue (Possible Seals)

Price & Condition: $150 neg

Pics:

WP_000192.jpg

WP_000193.jpg

WP_000194.jpg

WP_000201.jpg

WP_000200.jpg

******************************************************************

Item 6:

Forsale: Stock Z32 N/A Airbox

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up, Post (Buyers expenses)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Used

Price & Condition: $50 neg

Pics:

WP_000178.jpg

WP_000177.jpg

WP_000176.jpg

WP_000175.jpg

  • 3 weeks later...
  • 2 weeks later...
  • 5 months later...

*********Items Updated**********

Item 1:

Forsale: Defi Link Advance CR Meter (Boost Gauge) White + Defi-Link Control Unit II (Complete wiring, solenoid)(Plug n Play)(Packaged)(Genuine not copy)

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up, Post (At Buyers Expenses)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Used (As New), Good Condition, Working before pulled out of the car

Price & Condition: Currently on Auction at Ebay http://www.ebay.com.au/itm/130817588853?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_1618wt_1393

$130 starting bid price no reserve

Details:

Defi Boost Gauge Details:

http://www.defi-shop.com/products/end/dl_meter/summary_dlm/

-A mounting bracket, meter cup, regular position bezel are provided with this product.

Defi-Link Control Unit II Details:

Defi-Link Control Unit II is a necessary controller to install Defi-Link Meters, Defi-Link Meter BFs, and Defi-Link Displays. Up to 7 gauges and displays can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System."

Control Unit II Version 2.0

Parts NO.DF05002

Defi-Link System allows gauges and displays to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.

Links: http://www.defi-shop.com/products/end/unit2/summary_unit2/

http://www.defi-shop.com/products/end/unit2/spec_unit2/

http://www.defi-shop.com/products/end/dl_meter/summary_dlm/

Pics:

defiunit-1.jpg

defiboostgauge-1.jpg

556955_10151727436520066_625960065_24044144_1136272968_n.jpg

************************************************************************

Item 2:

Forsale: Hi Flow RB25Det/VG30 Turbo with Dump Pipe and oil braided line

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up (only Due of size and weight)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Might need rebuild. Unknown Issue (Possible Seals)

Price & Condition: $150 neg

Pics:

WP_000192.jpg

WP_000193.jpg

WP_000194.jpg

WP_000201.jpg

WP_000200.jpg

******************************************************************

Item 3:

Forsale: Stock Z32 N/A Airbox

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up, Post (Buyers expenses)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Used

Price & Condition: $50 neg

Pics:

WP_000178.jpg

WP_000177.jpg

WP_000176.jpg

WP_000175.jpg

******************************************************************

Item 4:

BLITZ BLOW OFF VALVE (BOV) RB26DETT Nissan Skyline GTR R32 R33 R34 260RS Stagea

BLITZ SS Super Sound

Blow Off Valves (BOV) (Pair)

For

Nissan Skyline

R32

R33

R34

Nissan Stagea

WGNC34 260RS

For RB26DETT TWIN TURBO

Was working perfectly on my Stagea before removal

These are genuine JDM Parts

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up, Post (Buyers expenses)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Used

Price & Condition: Currently on Auction at http://www.ebay.com.au/itm/130817583894?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_1846wt_1393

Starting bid price at $200 no reserve

******************************************************************************

Item 5:

Nissan Skyline R33 GTR

Also Fits

Nissan Stagea 260RS

Centre Console Gauge Unit

Front Torque

Oil Temp

Boost Pressure

Carbon Look Surround

Genuine

Made in Japan

(Removal Due of Nismo Gauge Unit Upgrade)

(Was working fine before removal)

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up, Post (Buyers expenses)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Used

Price & Condition: Currently on Auction at http://www.ebay.com.au/itm/130817605565?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_1940wt_1397

Starting bid price from $50 no reserve

**********************************************************************************

Item 6:

Nissan Skyline R32

RB20DET

Factory ECU

OEM Stock Unit

Genuine

Made in Japan

(Removal Due of Aftermarket ECU Upgrade)

(Was working fine before removal)

(Perfect for Ecu Flashing or Nistune)

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up, Post (Buyers expenses)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Used

Price & Condition: Currently on Auction at http://www.ebay.com.au/itm/130817600974?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_1526wt_1397

Starting bid price from $50

********************************************************************************

Item 7:

Nissan Skyline R32

RB20DET

Air-Flow Meter

AFM

Green Label

Genuine

Made in Japan

(Removal Due of Z32 AFM Upgrades)

(Was working fine before removal)

Location: Western Sydney Rooty Hill NSW (Near WSID)

Delivery & Condition: Pick up, Meet up, Post (Buyers expenses)

Contact: 0400 928 949, pm here or email to [email protected]

Item Condition: Used

Price & Condition: Currently on Auction at http://www.ebay.com.au/itm/130817598865?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_1603wt_1395

Starting bid price at $50

*********Items Updated**********

R33 Skyline GTR Centre Console OEM Gauge **SOLD**

R32 RB20DET OEM Factory ECU **SOLD**

Edited by GGGTS4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...