Jump to content
SAU Community

Recommended Posts

Hi,

These headers were installed on my 370z and I loved the gain and all. I have parted out my car and sold the car that's why I am selling them.

They were installed on my car and travelled for approximately 3000km. So it's in extremely good condition and even comes with the original box

I bought them brandnew from perfectrun and the cost was around $1800 landed and time to order & produce.

Genuine, designed for RHD so it makes life easier as I know USDM headers have a steering rubbing problem and requires more modding work.

Asking price is $1100 which is a bargain for what it is.

Item located in Melbourne south east suburbs and I am willing to post interstates at buyer's expense

Here are some pictures:

Fujitsubo-Super-Exhaust-Manifold-Nissan-370z-09.jpg

-----------------------------------------------------------------------------------

Here's a set of rare GTR R35 Stock Wheels with Nissan Center caps.

20" Super light weight, forged, nice concave, made by Ray's

3 out of 4 are in perfect condition

one with a rash and a scratch. On the same wheel so wouldnt cost more than 2 - 300 bucks if u want a perfect set.

$2999. Can courier to National wide with low freight cost.

577070_3919237027009_1877223085_n.jpg

318028_3919237387018_1499240174_n.jpg

248040_3919237707026_1462028710_3249607_364074218_n.jpg

178928_3919238147037_1462028710_3249608_358366682_n.jpg

600567_3919238627049_1174262140_n.jpg

601056_3919238867055_1324875234_n.jpg

481330_3919239147062_963820610_n.jpg

------------------------------------------------------------------

Genuine Rays Lock nuts in black color (USED)

General worn

goes for about $200 outside, yours for $50

581337_3919264747702_1462028710_3249621_596755100_n.jpg

---------------------------------------------------

Since I don't come onto the forum very often so it is best to contact me via sms: 0422358259

Cheers

I know they are 9.5 front and 10.5 rear but what are the offsets?

Do you have to fit run flat 20's on these or will standard 20 inch tyres go on fine?

Sorry forgot to mention,

20 x 9.5 +45 front and 20 x 10.5 +25 rear. Pretty close to the 370z and 370GT setup apart from being 1 inch wider on each (which is good so you have a flush guard)

As for tyres, normal road tyres are fine

bump, not sure how to edit post

got a Pivot throttle controller for sale too. same model as the one pictured

$130 shipped with harness to fit 370z (not sure about other cars but i think most nissan cars uses the same harness) .

P_311_Throller%20Controller_1_5580022.jpg

Edited by jona1986

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...