Jump to content
SAU Community

Recommended Posts

I know a few people here with Z11s that need a touch up.

I was privy to one that had '38k' on it with timing chain issues and tensioner issues. the car would not run and I was dragged in thinking it was electrical. mate of mine looked at it deemed mechancal and tossed another known km engine in. that dealer is south.

there are others doing heavy hits as well and regsitering them as clean.. those guys are north.

Just to put it out there the bz11s had a major recall on the timing chains. A lot never went in for the recall and I have done 2 in the last week. A surprise but when you pull it down you realize how cheaply built they are.

Out of interest, I went and had a look at a BB R34 Vspec GTR at a dealer in Sydney last week. I found it on carsales.

The salesman assured me that it has 28,000 genuine KM on it. However the seats, carpet and body looked like they had done alot more.

Quite upsetting - especially for the trusting person that ends up buying it, not knowing it's probably done atleast 10x what is on the odometer.

This dealer seems to sell a lot of GTR's (including Nurs, Mspecs - etc). Majority with very low KM and painted chassis rails.

Long due for a review I reckon.

I quite often go to Sydney for family reasons but also throw in sometime to buy parts/pick up stuff etc.

I went to a car yard down there to pick something up and while I was waiting, just looking at the cars and kms things just weren't adding up.

Price did not reflect kms. Especially on the cubes!

Had a white R34 GTR there that was said to be the owners with blah blah blah, minimal K's factory paint etc.. didn't look like it.

End of the day, the parts I was there to pick up, they didn't want to sell after the deal was done :S.

Terrible business etiquette.

Lets just say the yard is on a busy road and may or may not be green.

I remember the time I caught an import dealer out, it was basically a car from yahoo auctions with this digusting widebody front guards on it and black bonnet. It was an autech S15 and had over 130,000kms on it in Japan, I then saw it at a dealership in Sydney with 40-50,000kms on it. I have spent a lot of time backtracing import dealers and where they get their cars, and lets just say a lot of the jazz that comes into the country is graded R in Japan. I find it heartbreaking that absolute shit can come into the country, which is why im hesitant to buy a local import due to how much I know about the shit that floats in.;) As for that S15, Eddie Macguire says Brett Lee's bowling is good.

As for that bayside blue r34 gtr LOL, dont even go near it.......its been tampered with quite extensively.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...