Jump to content
SAU Community

Recommended Posts

Sounds like a nice list of parts

What turbo/s you going to run?

Come along on the 26th anyway doesn't matter what car we will only be doing the speed limit anyway

for the moment its going to stay stock turbos and ECU, dont have the cash to do the turbos and an ECU, i will be putting a set of HKS turbos in once i get some money and doing an ECU.

i dont have a car at all till i get the GTR back, she is daily driven :D if all goes weill i can pick her up on the 25th and go on the 26th tho, block is appart and being done as we speak, i totaly destroyed the 3rd and 5th bearing :whistling:

... block is appart and being done as we speak, i totaly destroyed the 3rd and 5th bearing :whistling:

Now me and the mad sceitist have to pull apart the block...sorry couldn't help it.

Its kind of a like a expensive safety feature with these cars...you'll get oil starvation and destroy the engine long before you loose grip...i still would have liked to see a larger sump on this build list for added protetion, but just make sure you overfill it by a 1L.

Also, make sure your builder cleans and checks everything throughly...you don't want to be pulling it apart again in 3 months cause of the bearing shavings floatin around in your block have destroyed the rings or something else....

if all goes weill i can pick her up on the 25th and go on the 26th tho,

Damn, thats pretty quick... cruise on 26th if you can make it...i don't think mine will tuned by then, but i might see if i can jump in with someone.

for the moment its going to stay stock turbos and ECU, dont have the cash to do the turbos and an ECU, i will be putting a set of HKS turbos in once i get some money and doing an ECU.

i dont have a car at all till i get the GTR back, she is daily driven :D if all goes weill i can pick her up on the 25th and go on the 26th tho, block is appart and being done as we speak, i totaly destroyed the 3rd and 5th bearing :whistling:

Sounds like a good plan

Motor should be well and truly run in after a cruise, just don't do to many freeway miles at first as the freeway and fresh bores are mortal enemies

Now me and the mad sceitist have to pull apart the block...sorry couldn't help it.

Its kind of a like a expensive safety feature with these cars...you'll get oil starvation and destroy the engine long before you loose grip...i still would have liked to see a larger sump on this build list for added protetion, but just make sure you overfill it by a 1L.

Also, make sure your builder cleans and checks everything throughly...you don't want to be pulling it apart again in 3 months cause of the bearing shavings floatin around in your block have destroyed the rings or something else....

Damn, thats pretty quick... cruise on 26th if you can make it...i don't think mine will tuned by then, but i might see if i can jump in with someone.

LMFAO thats gold.

I dont have the cash for the sump and NItto pump could only do 1 or the other, im going to be using a stock oil pump with a set of reimax gears in her, the ballfes should deal with the oil starvation issue at hand with the restrictor in the head, its going to be my daily till i pay it off (1-2) yrs and after that ill do the sump and big oil pump and turn her into a monster.

From all the shops i have spoken to they all seem to think i will be fine with the OEM pump and gears as long as im not reving out to 10k rpm or anything crazy like that constantly. Ill be doing the 1L overfill also, btw what oil do you guys find to be the best for the GTR?

Edited by T4NK

Hey guys, for those of you that dont know.... My clutch is now toast :P Didnt think it would last long at the power level considering it was way outside its happy zone!

Should have been double clutching not granny shifting :D

ANYWAY, that puts my car out of contention for the 26th as Jim Berry will be working his magic on my clutch around then.....

Ill still probably jump in with someone tho, CHOOKIE???? :woot:

LMFAO thats gold.

I dont have the cash for the sump and NItto pump could only do 1 or the other, im going to be using a stock oil pump with a set of reimax gears in her, the ballfes should deal with the oil starvation issue at hand with the restrictor in the head, its going to be my daily till i pay it off (1-2) yrs and after that ill do the sump and big oil pump and turn her into a monster.

From all the shops i have spoken to they all seem to think i will be fine with the OEM pump and gears as long as im not reving out to 10k rpm or anything crazy like that constantly. Ill be doing the 1L overfill also, btw what oil do you guys find to be the best for the GTR?

yeah fair enough - should be all good

redline is the best, but you can only buy that in drums. Royal Purple or Motul 300V fully synthetic are the other great alternatives. 10-40w should be good for a daily driver.

Hey guys, for those of you that dont know.... My clutch is now toast :P Didnt think it would last long at the power level considering it was way outside its happy zone!

Should have been double clutching not granny shifting :D

ANYWAY, that puts my car out of contention for the 26th as Jim Berry will be working his magic on my clutch around then.....

Ill still probably jump in with someone tho, CHOOKIE???? :woot:

lol...i was sort of wondering how long your clutch would last. Don't get me wrong - it still sucks that you toasted it. JIM's fully monty clutch is magic - zero slip.

My clutch & new flywheel ahould be leaving JIM's today - its a little different as its its a dual carbon clutch - superlight and responsive, but you actually need to slip it to put enough heat into so it actually grabs whens cold. It was a bit of a prick to get up steep driveways etc when the car was cold - JIM's almost doulbled the clamping force, so hoperfully it will be much better.

lol...i was sort of wondering how long your clutch would last. Don't get me wrong - it still sucks that you toasted it. JIM's fully monty clutch is magic - zero slip.

My clutch & new flywheel ahould be leaving JIM's today - its a little different as its its a dual carbon clutch - superlight and responsive, but you actually need to slip it to put enough heat into so it actually grabs whens cold. It was a bit of a prick to get up steep driveways etc when the car was cold - JIM's almost doulbled the clamping force, so hoperfully it will be much better.

Yeah it was going to have a limited life which we knew from the start, makes me wonder if it has been slipping during the tune etc? Will find out i guess!

Mine is a sort of custom setup too, he said it'll be better than the full monty :D he was saying he does a bit of work for Paul.... Didnt realise he was meaning yours lol

The clamping force on mine will double over the Excedy button which should be pretty impressive! He said the heavy flywheel was the way to go for me, why did you go light?

my car's penciled in at JEZ's for a tune next friday, and cold start saturday...so at this stage i will be making the cruise if all my parts arrive and theres no hipcups etc My biggest concern atm is my injectors (only 600cc)...expecting to crack 400awkw (more hoping lol, just to say i cracked 400awkw - expecting more around 380 on finaly tune, i'm not going to be disappointed either way) so i should be pretty much at the limit for these injectors on paper.

so if everything works out, someone can jump in with me.

Dont you need a run in tune first? And 600cc? Really? :/

400 is a nice number ;) I will head there once i clear some debt, but mine will be RWKW for the skids! haha

Yeah it was going to have a limited life which we knew from the start, makes me wonder if it has been slipping during the tune etc? Will find out i guess!

Mine is a sort of custom setup too, he said it'll be better than the full monty :D he was saying he does a bit of work for Paul.... Didnt realise he was meaning yours lol

The clamping force on mine will double over the Excedy button which should be pretty impressive! He said the heavy flywheel was the way to go for me, why did you go light?

that will be an impressive clutch lol - I actually didn't know i had carbon clutch till we pulled the engine out - was a nice suprice and explained the slippage. The hole clutch package (minus fly) only weighs like 3kg - much lighter then a normal twin. I just told JIM to machine me a billet fly wheel to match the clutch..so i don't know what i ended up with TBH.

Dont you need a run in tune first? And 600cc? Really? :/

400 is a nice number ;) I will head there once i clear some debt, but mine will be RWKW for the skids! haha

I got the as part of a package deal from the US last year when i was going to do a -9 setup - brand new nismo MAF's, new injectos, midori modified intake pipe and nismo front pipe for $1200US - was pretty happy...although i sold the front pipes, not using the twin turbo pipe, going for a map tune (no mafs) and the injectors are probarly to small.

Whats this place. Ello peeps

ahh outsider :domokun: :domokun: :domokun: :domokun:

Edited by wedge_r34gtr

I got the as part of a package deal from the US last year when i was going to do a -9 setup - brand new nismo MAF's, new injectos, midori modified intake pipe and nismo front pipe for $1200US - was pretty happy...although i sold the front pipes, not using the twin turbo pipe, going for a map tune (no mafs) and the injectors are probarly to small.

keep me posted mate if your offloading some parts, im going for a -9 setup so could be interested in some etc..

that will be an impressive clutch lol - I actually didn't know i had carbon clutch till we pulled the engine out - was a nice suprice and explained the slippage. The hole clutch package (minus fly) only weighs like 3kg - much lighter then a normal twin. I just told JIM to machine me a billet fly wheel to match the clutch..so i don't know what i ended up with TBH.

I got the as part of a package deal from the US last year when i was going to do a -9 setup - brand new nismo MAF's, new injectos, midori modified intake pipe and nismo front pipe for $1200US - was pretty happy...although i sold the front pipes, not using the twin turbo pipe, going for a map tune (no mafs) and the injectors are probarly to small.

ahh outsider :domokun: :domokun: :domokun: :domokun:

Yeah after a long long long conversation yesterday i learnt HEAPS about clutches and flywheels etc...... Lighter not always better, well rarely better in a lot of cars lol!

Dont run 600's man, you will only regret it and have to change it at a later date, do it right the first time :)

LOL, outsiders are OK, them wasteland boys bring the lulz :D

jim likes to talk clutch lol

...i'll make a decsion tonght. might see if i can pick some Id1000/2000 in sydney tomorrow

yeah only playin around..don't get to play in the wasteland that much due to NSFW...i'm basically on my work connection all the time atm :verymad:

Hey guys, for those of you that dont know.... My clutch is now toast :P Didnt think it would last long at the power level considering it was way outside its happy zone!

Should have been double clutching not granny shifting :D

ANYWAY, that puts my car out of contention for the 26th as Jim Berry will be working his magic on my clutch around then.....

Ill still probably jump in with someone tho, CHOOKIE???? :woot:

You'll probably kill the diff or driveshafts next LOL

I'll have a spare seat but might be a tight squeeze in the back of the car, though driving chooks does sound like a better plan

my car's penciled in at JEZ's for a tune next friday, and cold start saturday...so at this stage i will be making the cruise if all my parts arrive and theres no hipcups etc My biggest concern atm is my injectors (only 600cc)...expecting to crack 400awkw (more hoping lol, just to say i cracked 400awkw - expecting more around 380 on finaly tune, i'm not going to be disappointed either way) so i should be pretty much at the limit for these injectors on paper.

so if everything works out, someone can jump in with me.

Jelly

jim likes to talk clutch lol

...i'll make a decsion tonght. might see if i can pick some Id1000/2000 in sydney tomorrow

yeah only playin around..don't get to play in the wasteland that much due to NSFW...i'm basically on my work connection all the time atm :verymad:

He does, awesome bloke to chat too!!

Yes big injectors! Doooo it!

Yeah I'm on at work or my phone, wasteland is awesome haha

You'll probably kill the diff or driveshafts next LOL

I'll have a spare seat but might be a tight squeeze in the back of the car, though driving chooks does sound like a better plan

Haha nah already did that with 250kw so it's all replaced :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...