Jump to content
SAU Community

Recommended Posts

Haha nah already did that with 250kw so it's all replaced :P

Haha

It's something I'll never have to worry about with the ultra progressive power delivery from the auto box, least I hope not anyway

Though I did do dome rough measurements and worked out if I move the trans cooler and air con thermo fan I can fit one of those Just Jap stealth front mounts in without cutting the bar, should be good for something, choockie reckons they are better even on stock boost

Haha

It's something I'll never have to worry about with the ultra progressive power delivery from the auto box, least I hope not anyway

Though I did do dome rough measurements and worked out if I move the trans cooler and air con thermo fan I can fit one of those Just Jap stealth front mounts in without cutting the bar, should be good for something, choockie reckons they are better even on stock boost

Your drivetrain will be fine ;)

I have to get a thin Davies Craig fan for A/c as mine was removed due to the huge plazmaman cooler, your Trans cooler can go on the drivers side and the fan can be replaced....

If your not gunna up the boost don't worry about the cooler, OR run E85 :P

It's already running 12psi

Plan is to go the front mount, injectors , Z32 AFM and a basic highflow or just get steel wheels so they last and that should do as far as mods for decent power

EDIT Wanna stay with 98 fuel as can get it anywhere

Edited by m.j.h

Hey guys, for those of you that dont know.... My clutch is now toast :P Didnt think it would last long at the power level considering it was way outside its happy zone!

Should have been double clutching not granny shifting :D

ANYWAY, that puts my car out of contention for the 26th as Jim Berry will be working his magic on my clutch around then.....

Ill still probably jump in with someone tho, CHOOKIE???? :woot:

Martin you still keen to drive my car to mats for cruise? if not mat make you way to mine :P otherwise i wont be able to come :'(

It's already running 12psi

Plan is to go the front mount, injectors , Z32 AFM and a basic highflow or just get steel wheels so they last and that should do as far as mods for decent power

EDIT Wanna stay with 98 fuel as can get it anywhere

Yeah I ran around 250kw on 13psi like that.... You may get away with a side mount

Martin you still keen to drive my car to mats for cruise? if not mat make you way to mine :P otherwise i wont be able to come :'(

Yeah I'll come get it if needed man, either way it'll work out fine!! :)

Awesome yay i wont not be able to go :)

cefiro is sold finally, 1250 but also got 3" front partt of the exhaust and highflow cat for the skyline, might try get those in before cruise if i have time :)

Awesome yay i wont not be able to go :)

cefiro is sold finally, 1250 but also got 3" front partt of the exhaust and highflow cat for the skyline, might try get those in before cruise if i have time :)

Your a goose :P

I'm back what's up guys.

Sorry said hello then bailed.

I didn't read any of the previous posts but skimming I think I saw the words women and naked. Newcastle chicks are the bees knees

We missed ya :P

We mentioned that the WT brings the Lulz....

Oh and plenty of broad minded personty types up here if that's your fancy lol

I don't know if it's the forum or the iPad but I have to laugh at the way it changes S L U T to broad minded person and T U R K E Y to the schpinter of the universe

It's the forum

Like the word kunt spelt with a c turns to

flamin mongrel

Or add an s to it and you get

dream boats

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...