Jump to content
SAU Community

Recommended Posts

and if u have a fix for the ferry then no issues otherwise you would have to go out to hornsby and back up from there.But i know my GTR at 120mm off the pavement would scrape like a bitch on that ferry. Check the tide chart to make sure its not going to be low tide if it is stay clear.

Well I'm thinking that a dozen or so 2X4's about 900mm long should fix any clearance issues we may have

I may take u up on that offer, altho i wont fit in the back seat of a skyline, my legs touch the dash in the passenger seat of my GTR with the seat all the way back, and my legs hug the steering wheel when im driving :P

you would be doing down the Galston side then if u where to come from wisemans, so it would be a bit of a downhill that part should be fun, the way up on the berowra side you would want to take slow but then the old pac going home...well everyone knows about the old pac thursday night runs :wub:

and if u have a fix for the ferry then no issues otherwise you would have to go out to hornsby and back up from there.But i know my GTR at 120mm off the pavement would scrape like a bitch on that ferry. Check the tide chart to make sure its not going to be low tide if it is stay clear.

No wisemans on this run i dont think.... Too much distance to cover in one day for the Newcastle crew, hence why i think we take Old Pac to Hornsby, head accross and smash the Gorge and from there head over that ferry and back up the old pac, we are going early to avoid traffic etc on the way down, the return trip will be relax and cruise as it will be peak hour for that road!

If you think the scraping will be an issue we will need to re-assess!

Well I'm thinking that a dozen or so 2X4's about 900mm long should fix any clearance issues we may have

You said you've done this before yeah? Expert? ;)

And no salad or brown bread!

:ph34r:

YOU DONT MAKE FRIENDS WITH SALAD.

Pistons for my car should be in today if not tomorrow, then its just finish the block put it back togeather and rip a skid. car should be done next week if all goes well :yes: :yes:

Where you going? I am sure someone will throw on a quick cruise.... I know i would if my car is done (Should be)

I told Jarrad to hammer throw the toaster next so they could at least make brekky with it :laugh:

DUDE! Open sewer? lol

Move to Perth mate. I'll be back once or twice a yr, but without the skyline :-(. It's shit too, cause we have finally got a good skyline crowd back in newe.

LOL Notsureifsrs.

Dude, you should have fetched him out of there for his own safety.... there'd be HIV positive syringes floating around open sewers (srs).

We didn't know where he went to the next day. From what we understand, he fell in stumpling home from the pub and was too drunk to get out again!

lolololol mannnn chookie had to remind me about that the next day. i look like i knocked myself out!!

joel msg me when you wanna go for a drive buddy.

remind me not to ever move next to you jarad. sound like you had an epic night.

Or could get Pinkeye eh? :P

Have you checked the WT thread? I made some pictures for ya.....

g4NgU.jpg

LMAO. NOS bottles on the roof. Is that to help with downforce as the rear wing is a bit small

WTF as i'm writting this 19 new replies added!!!

Edited by wedge_r34gtr

YOU DONT MAKE FRIENDS WITH SALAD.

Pistons for my car should be in today if not tomorrow, then its just finish the block put it back togeather and rip a skid. car should be done next week if all goes well :yes: :yes:

Tell Jarrad that! :P

Skids? :woot:

Move to Perth mate. I'll be back once or twice a yr, but without the skyline :-(. It's shit too, cause we have finally got a good skyline crowd back in newe.

We didn't know where he went to the next day. From what we understand, he fell in stumpling home from the pub and was too drunk to get out again!

remind me not to ever move next to you jarad. sound like you had an epic night.

LMAO. NOS bottles on the roof.

WTF as i'm writting this 19 new replies added!!!

Ah bugger :/ Yeah the scene has taken off and will only get better with the guys we have!

Your mate/cousin (cant remember) knows how to party!

Jarrad was hilarious!

Haha yeah the NOS didnt fit anywhere but the boys wanted 2 OF THE BIG ONES....... That was a group build :laugh:

SAU Newcastle whore thread!

i made a nice salad for everyone and i think i was the only person to eat it! plus the white loaf of bread was gone and i had the brown all to myself.

... so i must of got mad and hammer throwed it on the roof LOL

i made a nice salad for everyone and i think i was the only person to eat it! plus the white loaf of bread was gone and i had the brown all to myself.

... so i must of got mad and hammer throwed it on the roof LOL

Hahaha i had some on my 3rd plate of food :P "Lets eat some grub man" mode!!!

You hammer throw...

A6Cbe.jpg

I may take u up on that offer, altho i wont fit in the back seat of a skyline, my legs touch the dash in the passenger seat of my GTR with the seat all the way back, and my legs hug the steering wheel when im driving :P

How frigen tall are you!!!

YOU DONT MAKE FRIENDS WITH SALAD.

Pistons for my car should be in today if not tomorrow, then its just finish the block put it back togeather and rip a skid. car should be done next week if all goes well :yes: :yes:

you getting photo's of all this? post some up if you are :-)

How frigen tall are you!!!

you getting photo's of all this? post some up if you are :-)

Of skids? We want video not photos :P

I assume you mean the build lol

How frigen tall are you!!!

you getting photo's of all this? post some up if you are :-)

I will have some pics but the guys computers are having issues so he has not been able to send them to me -_- , im 6 foot 4 and i have very long legs im also not the lightest guy around lol they call me T4NK for a reason ;)

I think i have video of when i blew the engine, wont hear much tho just see head lights rushing at you as it was at 3am in the morning.

I think im getting a go pro also so should be able to take video of skidz, on private roads ofc.

Edited by T4NK

Member Joined Total Member Posts Posts Today % of today's posts 34GeeTeeTee 12-February 08 3,187 130 8.11%

Sheeeet! Better go home and stop thrashing SAU :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...