Jump to content
SAU Community

Recommended Posts

Haha its about time I get better wity working stuff anyways jarebare.

Bbq sounds good. Im also busy atm, get the keys for my house today. And the nats, again hard for me to get time and money as im now a home owner to!

Fkn home owners!!! Oh, we are looking at open houses tomorrow lolz

As for the BBQ we can pick a date with plenty of notice, can be fkn Bathurst weekend if it needs to be? I'll set the TV up on the deck with some lounges etc.... By then I might have a beer again, will be well over 3 mths by then :/

Fkn home owners!!! Oh, we are looking at open houses tomorrow lolz

As for the BBQ we can pick a date with plenty of notice, can be fkn Bathurst weekend if it needs to be? I'll set the TV up on the deck with some lounges etc.... By then I might have a beer again, will be well over 3 mths by then :/

Im down for that... Been a while since I went to a Bathurst BBQ

Oh and was looking at the rear bodywork on the racecar the other day

Had a dark line about 2 inches wide right across the back and I thought I had f**ked up the paintwork somehow

Was actually dirt from the air pressure doing funky things at the back of the car

I see you tagged some of mine

As my car takes good pics why not

Could include go kart maybe???? Hahahahahahaha

Lol ill get some on there for you! No farken go kart!

Actually technically you arent an SAU NSW member but ill add it anyway cus i can :P

  • 2 weeks later...

Lol ill get some on there for you! No farken go kart!

Actually technically you arent an SAU NSW member but ill add it anyway cus i can :P

Where's my stickers kunt

So what's been happening

My cams finally got found so now have one week to assemble and tune car for next event

Lots of late nights ahead I think

  • 1 month later...

yea seems everyone is really busy these days... myself included.

someone else can step up and start organising things again maybe??

Ill be back on board once we move and the small place is sold mate! Once that happens i am happy to help out again, until then i gotta work hard to get it done :)

I still wanna get over and check out your new pad mate! Sorry we missed your do, we were sunburned and buggered from renos!

yea all good mate, sounds good...

hopefully i will still have my car... thoughts of selling have been cropping up again, but probably not untill the new year at this stage.

:( Noooooooooooooooooooooooo

Hopefully the track day and the revival of some cruises and car events will change your mind? Bring it to the hillclimb on the 2nd November too! Cheap fun and not too much stress on the car!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
×
×
  • Create New...