Jump to content
SAU Community

Recommended Posts

if your car is pre 1996 then tint laws are different

i pulled this a few times on my last car (94 r33) it had 10% tint on it, every time i got pulled over and questioned about it id just say it came like that, has been through compiance etc with it on... and they didnt say anything

but as mango said its also got alot to do with how u drive and ur attitude toward cops. when it comes down to it the police can yellow sticker you for just about anything

Link to comment
https://www.sau.com.au/forums/topic/4037-window-tint/page/2/#findComment-69947
Share on other sites

Originally posted by Gerds

limo tint is nice but u wouldnt want to void ur insurance.

Gerds it is very unlikely that a claim would be knocked back for

limo tints as the car has to be claimed to be "unroadworthy" and there would have to be proof that the accident was caused because of the tints - it is not impossible but very unlikely...

Link to comment
https://www.sau.com.au/forums/topic/4037-window-tint/page/2/#findComment-70386
Share on other sites

Guest INASNT
Originally posted by Spada33

Gerds it is very unlikely that a claim would be knocked back for

limo tints as the car has to be claimed to be "unroadworthy" and there would have to be proof that the accident was caused because of the tints - it is not impossible but very unlikely...

crap! insurance companies will find anything to try and void a claim!

few years ago a friend in a vk calais put fe2 suspension in his car without telling racv, he pulled out of a street and cleaned up another car, his fault, and when the asser checked the car out, he jacked up the car and saw the suspension and said that it wasent on the policy and void his claim! Suspension had nothing to do with the accident, yet he got done!

Link to comment
https://www.sau.com.au/forums/topic/4037-window-tint/page/2/#findComment-71029
Share on other sites

Adam those two lines are created because it's maybe too stick to the window.

it holds the winscreen while it is half way up so it does not rattle, I think you can undo all the panel then loosen up the screw or remove it all but I would not recomend it.

as long as sand or rock doesnt sit in it, it sould be ok! it better be safe then sorry.

cheers

Joe

Link to comment
https://www.sau.com.au/forums/topic/4037-window-tint/page/2/#findComment-71051
Share on other sites

i have seen lots of import cars with these lines. My 32 & my previous 180sx had them too. I was at a tinting place a while back and he was looking at my windows and said to the other fella there that my car had these same lines on it that other people who had been in there.

I find it is worse if you wind your windows down while they are wet. I now allways dry my windows well before i put them down.

Link to comment
https://www.sau.com.au/forums/topic/4037-window-tint/page/2/#findComment-71258
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...