Jump to content
SAU Community

Recommended Posts

Hey hey hey

Ive always wanted to try the Subaru upper engine cleaner. Heard of them being used on subies, evo's, vw's. So why not get rid of some carbon build up in the gtr?!

Bad idea? Please tell me why?

Yes I have searched, yes they are all in 2006 and one I found was in 2003 lol.

Question time. Where do I spray it? Do I take my intercooler pipe off the plenum and spray the first 1/2 of the can in there? Then after that where do I spray while its running?

Thanking you.

Link to comment
https://www.sau.com.au/forums/topic/404398-lets-talk-upper-engine-cleaner/
Share on other sites

So far,

  • Do it before a oil change
  • Spray 1/2 the can in each individual cylinder (thanks silvia guys)
  • Do the other half while the engine is running through a vac line
  • Make sure it is well ventilated (some videos are crazy haha)
  • Get it from Subaru dealer
  • The more smoke the dirtier your engine was
  • Its the ducks nuts

id be interested to know if anybody has had any bad experiences with it...

anybody?

i used a can on my old sonata and it seemed to make it smoke even more and use more oil.... (tho its got over 250k kms on it n they are shit engine...)

Still got a can sitting in there so wondering if i should run it thru the RB25...

turbo seals? O2 sensors? high flow cat?

Nulon upper engine cleaner is cheaper.

Warm up the engine first. Turn it off and spray it in all hoses leading to the manifold and AAC. Let it sit. Crank engine and it will start in 5 seconds or so. Repeat.

You'll probably need to reset your idle. I even had to change my cold start values.

Nulon upper engine cleaner is cheaper.

Warm up the engine first. Turn it off and spray it in all hoses leading to the manifold and AAC. Let it sit. Crank engine and it will start in 5 seconds or so. Repeat.

You'll probably need to reset your idle. I even had to change my cold start values.

The subie stuff is only $18 per can. Did it f**k your cold start valve? havent heard of the subie stuff needing to reset idle nor taking out the cold start valve. Maybe this is a skyline thing

been thinking about this stuff as well, think I'll see what my mechanic thinks next time I'm in there.

Some Mainlube engine flush probably wouldn't go astray either for the oil system!

I like your thinking. Let us know what your mechanic says

i used some in my vt commodore (had about 210,000kms on the clock at the time, and has nearly 245k on it now). other than making it smoke like a sumbitch when i started the car again (until it burnt it all away), it didn't actually do much. i pulled the intake plenum off afterwards and it was still sort of caked on so i scrubbed it clean with some carby cleaner and degreaser. didn't make any difference to how the car drove though.

I've used this sort of thing many times in a few different forms (ie nulon, wurth, AC delco etc.) and so far have found the subaru one to be the most effective. The main thing to BE AWARE of is that i believe the fumes are carcinogenic, so ALWAYS be in a well ventilated (preferably outdoors) area, and use caution while spraying. Aside from that, follow directions on the Subaru can, and have an explanation ready for when the CFA arrive :).

  • 1 month later...

Nulon upper engine cleaner is cheaper.

Warm up the engine first. Turn it off and spray it in all hoses leading to the manifold and AAC. Let it sit. Crank engine and it will start in 5 seconds or so. Repeat.

You'll probably need to reset your idle. I even had to change my cold start values.

its also rubbish compared to the subaru stuff, i use the subaru stuff in everything

i used some in my vt commodore (had about 210,000kms on the clock at the time, and has nearly 245k on it now). other than making it smoke like a sumbitch when i started the car again (until it burnt it all away), it didn't actually do much. i pulled the intake plenum off afterwards and it was still sort of caked on so i scrubbed it clean with some carby cleaner and degreaser. didn't make any difference to how the car drove though.

yeah iv never noticed a difference after using it.

Only difference i ever noticed was a bad one. Used it on a 2.0 4cyl Sonata with 250k on it. It blew a tiny bit of smoke beforehand and used a bit of oil. After some upper engine cleaner it blows smoke like a mother f**ker, especially from the valve seals (i pity the people that are behind me at the lights after sitting for a while) n it uses bulk oil now.

Never again.

The only time i can think it would be a useful product is as a repetitive preventative product in motors that are prone to build up. Otherwise its probably not going to move anything substantial (like injector treatment) and if it does itl probably create a problem in a car that is otherwise running ok...

Edited by jjman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...