Rb25/30, Kando T67 & Mvr, Powerfc, 750Cc, Splitfires ++++

[32TAXI]

Will only seperate parts once engine is sold!

RB25/30 Long motor rebuilt november 2011,

Reco head with welded vtc and waterjacket, RB20 inlet cam, 25 exhaust cam, metal head gasket.

Linished std crank, crank collar, N1 oil pump, New acl bearings and moly rings on std RB30E pistons & rods.

1.2mm restrictors, block drilled, lightly honed. New Exedy HHHD clutch, timing belt, idlers and waterpump.

Can see running and fitted to vehicle.

$1650

Kando T67-25G with Tial MVR 44mm wastegate mounted off exhaust housing.

Includes modified stainless top mount manifold, dump and screamer/flanges/flex.

Turbo 4months old & still under warranty.

Fitted to vehicle and only for sale once engine sold!

$1250

Freddy RB25 inlet manifold & 80mm throttle body, modified to clear R32/S13 master cylinder.

Chrome outer and machined face, Tps & 3' intake pipe/hoses included

Fitted to vehicle and only for sale once engine sold!

$450

Apexi powerFC suit rb25

Includes hand controller, Z32 afm & k/n pod filter.

Tuned by Pits - Rb25 with Z32 afm with 80mm throttle,750cc & Gt3037s with .63.

Fitted to vehicle and only for sale once engine sold!

$1000

Nismo 750cc injectors in modified fuel rail with twin feeds.

Fitted to vehicle and only for sale once engine sold!

$600

Splitfire coilpacks suit series1 R33 Rb25.

Fitted to vehicle and only for sale once engine sold!

$350

Greddy GREX oil cooler kit

big cooler, thermostat and filter relocator, New Russell braided hose

Fitted to vehicle and only for sale once engine sold!

$550

R32 40mm Alloy Radiator & 16' electric fan

Fitted to vehicle and only for sale once engine sold!

$220

Complete 3.0 litre setup ready for your transmission in a silvia, skyline or whatever????

All parts are currently fitted to my R32 GTST and I drive it everyday to work.

No dyno sheets, No tyre kickers & No bullshit!

Very aggresive and No knock even on 14psi

Heaps of quality R32 parts available!

Will only seperate parts once engine is sold!

Will sell all $5500 ono and include spare RB25 long motor!

Gold coast

Sam 0423 648 114

Edited July 22, 2012 by 32TAXI

[Crans]

Can you please post pics of the turbo?

[chilzzi]

Send me a PM once engine is sold. Keen on the Power FC. Sent you a text about it earlier today.

[Josh_TypeX]

This is a bargain... Makes me depressed thinking I how much I have spent putting together a similar setup (without a 3L). Am I reading right that you are including 2 running engines in the $5500 package?

[32TAXI]

Yeap, All the shit plus 2x engines - 1x rb25/30 complete running, 1xrb25 spare long motor

My plans were to bolt 25 back in and go further with 30!

Basic bolt up to your gearbox in either R32 or R33 and GO!

p.s. Turbo in picture not included in sale

[ozboy10]

would u post?

[32TAXI]

would u post?

Sorry, Not posting an engine

[32TAXI]

Story of the 25/30!

The old rb25 had leaky valve stem seals and smoked on hard decel, but still had even comp on all.

So weighted it up to rebuilt a 25 or 30 but scored a 30 Short block, collar, cometic head gasket, new waterpump and 2x 1.2mm restrictors cheap off SAU so it started.

.

Bought a spare 25 head, welded water passage and vct then got full reco and 2x valves by Gilberts.

Got a New genuine N1 oil pump and Nissan gasket set, Acl bearings and Moly rings from states at the right time.

Crank was sent to Probuilt, Grubscrews and collar fitted, checked and linished.

Gave the block a good clean, drilled, restricted and a light hone(slight top ring wear) Standard bores, deck and crank, new dayco belt and hi/lo tensioners, RB20DET inlet cam/sprocket as always wanted GTR covers!

I'm a Mechanic of 15 years at Nissan, In the trade as they say and was built cheap so sell cheap.

RB25/30 was built in november 2011, No forgies, No rods, supported well, never spun over 7k or 14 psi.

Just a tough street engine that pulls hard, very aggresive and runs great.

Needs a good balancer as never got around to it & VCT can be fitted via external line or internal mod if needed.

$1650

Parting out my modified R32 4 door sedan once engine sold

eg. 327AXI rego, 5 months rego, mod plated, no defect, rolling shell $3500, Safety21 4door 4seat 6point rollcage $1200, GTR front bar $500, GTR Bonnet $250, R33 5 speed g/box $1200, nismo 2way lsd $650, Tein HE driftmaster coilovers $900, cusco rear arms $250, RG tension arms $150, Adjust front upper $220, 28mm rear swaybar $ 250, Sabelt GT1 seats $650, Greddy profec b spec 2, greddy timer, pivot shiftlight, Nardi wheel + + + +

Edited July 26, 2012 by 32TAXI

[Lust_R33]

Keen on the inlet mani and oil cooler, let me know wen ur ready to sell.

[32TAXI]

Keen on the inlet mani and oil cooler, let me know wen ur ready to sell.

Motor and inlet sold

Oil cooler available $550

Turbo, power fc, injectors, splitfires and alloy radiator also available