Jump to content
SAU Community

Biggest Internal Fuel Pump for R32???

Bl4cK32

By Bl4cK32,
in Engines & Forced Induction

 Share

Recommended Posts

Bl4cK32 Grand Master

Bl4cK32

Posted
Posted

In the SA section we were discussing fuel pumps, particulary the Bosch 040 and the 044.

Apparently (Mark from Tilbrooks) seems to think the 044 flows the same as the 040 when they are mounted internally.

Can anyone confirm this, and if it is true, is there another brand that would flow more? (Putting it in tank as the 044 would be)

Yes, i have thought about a swirlpot and using the 044, but i want to keep the car stdish (:) HAHA with a RB31DET) looking.

looking to support up to 350rwkw - any suggestions??

Link to comment
https://www.sau.com.au/forums/topic/40535-biggest-internal-fuel-pump-for-r32/
Share on other sites
Whoneedstherapy Veteran

Whoneedstherapy

Posted
Posted

I was under the impression that they were both rated at the same level, around the 600hp area, but the 040 had a flat bottom with a filter built into it as it was designed to be an in tank pump, where as the 044 was designed to be an external pump.

For 32 GTR's the tomei pump apparently flows 700hp or so and bolts right in, you do pay for it big time though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • Kinkstaah
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Kinkstaah · Posted

      You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • Dose Pipe Sutututu
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Dose Pipe Sutututu · Posted

      LOL.... you are correct there.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      It's been quite the ordeal but hey, at least you figured it out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...