Jump to content
SAU Community

Recommended Posts

car has current Road Worthy Certificate

Year: 1996 Series 2

Engine: RB25DET

Transmission: Manual

Kilometres: 159XXX

Engine/Driveline:

Hybrid intercooler kit

Custom piping

Hypergear TR43i turbo kit (rated 550hp)

Modified manifold

50mm external wastegate

Car is running 10 pounds

Custom v-band 3inch dump pipe and front pipe all in 1 piece

Jasma 3.5inch catback exhaust that gives it a great rb note

Custom steal 3inch intake pipe

Cold air intake

Tomei Adjustable Cam Gears

Splitfire coilpacks NGK-R spark plugs

Gates Racing timing belt

Bosch 040 fuel pump

Strong and good condition rb25 gearbox

Exedy Heavy Duty Button Clutch

JJR custom tailshaft

Diff has been shimmed so its like new

Interior:

Interior is clean and looked after

Bride Gias bucket seat

Nardi deep dish wheel with quick release Pioneer double din headunit

4 6inch sony splits

Fire extinguisher on passanger side

Greddy electronic boost gauge

Greddy turbo timer

Mini ecu that has different settings

Alarm worth $450

Exterior/Suspension:

Standard series 2 bodykit

Jun rear bar lip

Custom front lip

Custom Roof wing (very rare!!)

Xenon HID lights

Desmond Regamasters:

17x9 +18 with brand new 225/45 Federal 595 RS-R tyres

18x10.5 +18 with 90% Continental tyres

Front Tein HR fully adjustable coilovers

Rear ISC fully adjustable coilovers

Brand new adjustable ISC camber arms

Brand new ISC Hicas lock bar

Brand new Gk-tech lock spacers

Brand new Adjustable Gk-tech rear toe arms

Brand new Gk-tech front castor arms

Brand new Gk-tech rear traction rods

Brand new Gk-tech rear subframe slip in collars

Brand new Adjustable front tie rod ends

Car is serviced every 4000k's

Oil: Castrol Edge 10/60

Oil filter

Sparkplugs: NGK-R gap 0.8

Car will also come with standard parts, airbox, steering wheel, stock rims and tyres.

Rego till January 2nd 2013.

Call 0413507269.

post-75799-0-54115000-1344326218_thumb.jpg

post-75799-0-31303600-1344326333_thumb.jpg

BUMP, Willing to sell cheaper without the, Desmond Regamasters:

17x9 +18 with brand new 225/45 Federal 595 RS-R tyres

18x10.5 +18 with 90% Continental tyres. I will put the stock wheels back on.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...