Jump to content
SAU Community

Help For New V35 Owner In Sa

dFed
 Share

Recommended Posts

newv35owner Contributor

newv35owner

Posted
Posted

Hey, i also have a v35 350 gt-8 and can highly recommend southern hi-tech dyno tune in melrose park off south road. They were excellent with the work that I needed done to the car. They didn't bulk at the fact that it had a cvt and their rates are incredibly reasonable. Their details are listed in the SA section. If you have a look in the SA section there is a list for contacts for almost all of the things that you are after.

dFed Apprentice

dFed

Posted
  • Author
Posted

Hey, i also have a v35 350 gt-8 and can highly recommend southern hi-tech dyno tune in melrose park off south road. They were excellent with the work that I needed done to the car. They didn't bulk at the fact that it had a cvt and their rates are incredibly reasonable. Their details are listed in the SA section. If you have a look in the SA section there is a list for contacts for almost all of the things that you are after.

Cheers mate ill check them out!

dFed Apprentice

dFed

Posted
  • Author
Posted

Okay, so as for the second key i went to main north nissan and they did me up a quote for an exact replica of my key. Apparently it costs about $450 for a new key and then $90 for a cut and code.. I am going to call up and see if i get a key from ebay whether or not they can cut and code it so i'll let use know.

GeeDog Experienced

GeeDog

Posted
Posted

I got a key cut at North East Lockmiths at Windsor Gardens - $120 for the key, cutting & cloning the imobiliser chip. No remote buttons, but it opens the door & starts the car, so if I lose my other key I'm not stuffed. Just need to turn up with the car & a working key - took around 30 minutes. If Tony's key works I'll get one of those as well, but it will have to have the immobiliser coded at Nissan.

dFed Apprentice

dFed

Posted
  • Author
Posted

Hey guys just another question, I need a jack for my v35 and I asked nisswreck but they wanna charge me $95 for one they just pulled out of a wreck, which is kinda steep I reckon. I have one from my old R34 but its a little rusted because it was left outside after I rode off the car. My mate was saying you can get a jack from super cheap at will fit it fine for about $50? Suggestions? I could just get the one from nisswreck but if i can save a bit it would be better

Seano350GT Veteran

Seano350GT

Posted
Posted

Hey guys just another question, I need a jack for my v35 and I asked nisswreck but they wanna charge me $95 for one they just pulled out of a wreck, which is kinda steep I reckon. I have one from my old R34 but its a little rusted because it was left outside after I rode off the car. My mate was saying you can get a jack from super cheap at will fit it fine for about $50? Suggestions? I could just get the one from nisswreck but if i can save a bit it would be better

I picked up a 1200kg jack and 4 chassis stands from Autobarn about a month ago for like $90 for the lot. Jack works perfectly piss easy to setup and use.

  • 1 month later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • MBS206
      Hi everyone.

      By MBS206 · Posted

      I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...