Rear Toe Arm Bushings

[zoomzoom]

Hi, I have a superpro bushing kit on the way, has both front and rear suspension bushings. However it doesnt seem to have a toe arm set included, so I was going to pick up another superpro one.

Not sure about the skyline, but on my stagea the inner toe arm bushes have a 50mm inner tube as opposed to the 40mm on the other arms.

Superpro has the eccentric 40mm tube bushings that would be used on the camber arms, would those work if some spacers/washers were added on either side of the eccentric tube to make up the 10mm gap?

[samos69]

Not sure if this will help - driftworks sell only 2 sizes of bushing for the rear, this pic shows which ones are all the same (orange dots) but they don't show the inner toe arm as they are picturing it with aftermarket toe arms

Edited August 14, 2012 by samos69

[zoomzoom]

Thanks, looks like Ill use normal centred bushings and reuse the nissan eccentric bolts, with a couple of washers to space the bushing.

Speaking of which, the camber inner eccentric bolts are a bit worn on the washer side, are they a standard item to replace? Thinking of asking the regular places whether they have some, ie supercheap auto, repco, etc.