Jump to content
SAU Community

Recommended Posts

Hi all,

My current headlights look a little dated cos they're cloudy and not sparkling like they used to.

i'm also looking for clear indicator lenses (possibly white fog lights too).

I think this will seriously improve the look of the car and something I really want to do.

Is it best to source new plastic for the headlights so it's brand spanking? Anyone had experience with this?

Not having much luck finding any new ones.

I had this problem on my 33.

All you have to do is get metal polish and rub down your headlights with it. It will clear them right up. Obviously its not a permanent fix, but then again getting new headlights isn't permanent either.

The clouding/yellowing of your headlights comes from oxidization basically the water hits your headlights and dries up leaving a residue/rusting the plastic. Once you cut and polish it, it goes away for awhile say a year or two then just do it again. Simple, easy and cheap way to fix it.

Don't waste your money on new headlights if you don't have cracks in yours.. unless your printing money, in that case send me some haha.

I had this problem on my 33.

All you have to do is get metal polish and rub down your headlights with it. It will clear them right up. Obviously its not a permanent fix, but then again getting new headlights isn't permanent either.

The clouding/yellowing of your headlights comes from oxidization basically the water hits your headlights and dries up leaving a residue/rusting the plastic. Once you cut and polish it, it goes away for awhile say a year or two then just do it again. Simple, easy and cheap way to fix it.

Don't waste your money on new headlights if you don't have cracks in yours.. unless your printing money, in that case send me some haha.

I'll take some too :)

But yeah they are correct, polishing works a treat and is simple. What I have also done in the past which gives a even longer term answer is given them a light sand then spray a Quick clear coat over them, that gives them an awesome long lasting shine (sounds like a tooth past ad)

it depends on the level of oxidisation as to whether the lense can be saved.

meguiars do a headlight restoration kit, seen it done on an r34 and looks good

i did a DIY version on my v35 - 1000 then 1500 grit wet rub with soapy water, plastic polish, then plastic protector. apart from needing to repolish the headlights once a month, its perfect.

tried both techniques on a 2003 holden astra - fail. those could not be saved.

The worst thing about those kits are the fact that most of them dont have a UV protectant which i whatcuases the oxidisation and yellow in the first place.

Great product from invision: headlight restoration kit, $40 from autobarn and some other auto retailers, comes with all the right sand paper, chemicals, cloths, gloves and the UV protectant.

My V35s headlights were yellow as when i bought them, dealer buffed them to clear and within another week they were back to yellow. Tried this product after being recommende it from a fellow V35 owner and they have never been yellow since.

The maguires one is crap to be honest. Cleans them up and turns yellow a fortnight later its also ironic that i has a picture of a V35 as the demo car on the bottle.

Edited by Howaitonaito
  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...