Jump to content
SAU Community

R34 Parts Wanted, Clockspring, Trim Pieces

Stoney85

By Stoney85,
in Wanted to Buy

 Share

Recommended Posts

Stoney85 Collaborator

Stoney85

Posted
Posted

Just picked up a really clean R34, but there is a few minor issues i want to address and there will be mods i want to do in the future, so i may as well start a WTB topic now

Firstly, i dont have a working horn, and i'm pretty sure ive traced it back to a faulty clockspring, so i'm after one of them

The boot is missing a few trim pieces and a fair few clips, the main trim pieces are the two main ones that run east/west, the small one that covers the boot latch and the other that covers the space bewteen the struts, there is also a few clkips that hold the rest of the trims in

The reverse lights in the bumper are fading and starting to become cracked/brittle, possibly after some good ones to replace them with

As this car was originally a S1 r34 auto non turbo (now a 500hp RB26) it doesnt have much, ie triple guages etc, so im open to see what these models missed out on, and possibly a guage setup, or something aftermarket to suit

Other than coilovers this car has stock suspension and arms, i dont need to yet, but again i plan on it, and thats to change all the suspension arms to adjustable

I think it needs steering rack bushes too

I'll be wanting some spares rims/tyres to use as drift spares, thinking 17"s

Wanting an Innovate Wideband to fit to this for piece of mind motoring

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...