Jump to content
SAU Community

Recommended Posts

Hey Guys,

Up for sale is my auto 1997 Toyota Chaser JZX100, it has been much loved for the 7 months that I have had it. I bought it in Jan bone stock with some 19inch rims, that are still on the car. I have done all the modifications to this car. All work has been carried out at S-Garage and tuned at Chequered Tuning. The car now has 100,xxx kms, it had been serviced every 5,000kms and it is time for the 100k service, because I am after a quick sale, I will supply all parts to do 100k (timing belt, gaskets etc.) except oils, or if you supply oils I can do it. The reason for my sale is that I am on my P's and i travel far to go to work, and would like a daily. The car has usual scratches with age, and a common problem with dash lift. Apart from this the car has been kept in great condition, since in my possession it has never spent a night not undercover, and has always and religiously been filled up with 98 octane from BP only.

The mods are as follow.

Engine:

Greddy LS Spec FMIC

HKS Hybrid Hi Flow Panel Filter

AM Performance Dump and Front Pipe

HKS Hi Power Catback

Disabled ETCS

HDI Electronic Boost Controller

KTS Steel Intake Pipe

NGK Power Cables

Apexi SAFC Neo Tuned @ Chequered Tuning

Handling:

BC Racing BR Type Coilovers (Damper Adjustable)

Cucso Strut Brace

Interior:

60mm SAAS boost guage

Factory option Coin Holder

Kenwood CD/USB/AUX Headunit

Pioneer 1200W Sub

Exterior:

Eyelids

Factory Toyota Weathershields

Factory HID's

5000k Fog Lights

19inch Rims

Origin Roof Spoiler

30% Tint All Round

Guards have been rolled.

This sale is very regretful I will definitely be buying a Chaser when I'm off my P's.

Im asking for $13000ono with RWC and rego till June 2013, this will include stock cooler, exhaust, dump and front, stock suspension and the 100k kit.

I can negotiate price even more if you would like it on stock rims instead.

I am open to offers to swaps.

Once again a Perfect Daily or if you would like to strap a bigger turbo on for some more fun.

Contact me on 0431195777.

Ruben

I will take some pics in the coming days. This is a pic from a month or so back.

005.jpg

Edited by 93Q45
Link to comment
https://www.sau.com.au/forums/topic/407094-fs-jzx100-chaser-tourer-v/
Share on other sites

Auto and sorry mate looking for daily, that I can run around!

Wheels are 19x8.5x35 wrapped in Traingle 245/35/19 tyres which are 85% all round

Also RED Blox Alloy Nuts

Edited by 93Q45
  • 4 weeks later...

bump price drop $12,500 will be doing 100k service today.

So nothing else to do, perfect daily.

Also has a Pioneer 1200W Sub with a double din Kenwood Headunit.

Edited by 93Q45

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...