Jump to content
SAU Community

Recommended Posts

Listing on behalf of a mate.

Engine hardware

26/30 prepped crank and block

Acl race series bearingsbig ends and mains

Arp main stud kit

Arp head stud kit

Baffled sump

1mm tome oil restrict or

Shot peened rods

Brand new rb30 na pistons

Grants nos rated rings

1.2mm cosmetic head gasket

Remax billet oil pump

Full reco r33 gtr head

3/4" drain back from head to sump

Stainless steel exhaust manifold

60mm external gate

Gt40 turbo

3" exhaust from turbo back

750cc injectors

Malpassi fuel pressure reg - rising rate

Yellow jacket coils

aero speed cam gears

Hybrid intercooler 3" outlets

Aluminium radiator - 3 core

Greddy catch can

Turbosmart dual stage boost controller

Nitto clear timing belt cover

Z32 air flow meters with greddy Y pipe

Drive train

low k 33 gts-t box

800hp npc clutch

1.5 cusco gtr dif and drive shafts

tomei short shifted

20" roh modenas

Exterior

Chrome window tint

Silver decals

Carbon fibre side mirrors

R33 gts-t bar modified

Interior

Series 2 gtr interior immaculate condition

Custom fiberglass parcel shelf painted to match exterior

Custom 3 pod mould above centre console

7" motorised kenwood touch screen dvd player

Full kicker stereo

After market speedo cluster with led lighting

8 colour changer on all dials

That is all I can think from top of my head. I will answer questions I can however best to contact Roy on 0424775829. Car is located in toowoomba. Only has 82000 original kilometers on the clock. Plates in the photo are not included in price.

Asking price of 16500. Car has made 500+ on only 15psi with pump fuel. Serviced regularly using top quality oils and lubricants.

Link to comment
https://www.sau.com.au/forums/topic/407472-big-hp-r33/
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...