Jump to content
SAU Community

Recommended Posts

R33's are heavier, longer & sit higher stock in comparison to the r32 (I like R33's over 32's by the way)

The r34 is slightly smaller & not as wide as the r33 but the difference is minimal

it's the colour of the r33 in that pic that makes it appear smaller by comparison imo, plus they aren't all factory stock examples in that photo except *maybe* the r34 & r35 so rims coilovers & tyres sizes are all unknown variables

All those myths have been busted, r33 has better power to weight ratio than the 32 in all models. The only thing the 32 has more of is arse fat. The 34 in narrower, taller and longer than the 33 (how that = looks better dunno) its Lego block like dimensions are "too square"

Just look at the picture.... It has all the answers, it does not lie.

Edited by madbung

All those myths have been busted, r33 has better power to weight ratio than the 32 in all models. The only thing the 32 has more of is arse fat. The 34 in narrower, taller and longer than the 33 (how that = looks better dunno) its Lego block like dimensions are "too square"

Just look at the picture.... It has all the answers, it does not lie.

I'm just talking pure dimensions

R33 has heavier kerb weight compared to r32, not sure about 34 weight but it's definitely smaller in measurements (& shorter too) compared to r33 but again the difference is not by much, my comment was in regards to size not power/weight ratio etc.

the r33 in that pic sits too low to be stock & dark colours on objects in general always make them 'appear' smaller.

That being said I've always had a soft spot for the r33 gtr, & my first car was an r33 gtst :)

Good for you yoyo...

R33 gts-t

Exterior length 4640mm

Exterior width 1720mm

Exterior height 1340mm

Interior length 820mm

Interior width 1415mm

Interior height 1090mm

Wheelbase 2720mm

Front track 1480mm

Rear track 1460mm

Ground clearance 145mm

Weight 1390kg

R34 gtt

Wheelbase 2,665 mm (104.9 in)

Length 4,705 mm (185.2 in)

Width 1,725 mm (67.9 in)

Height 1,375 mm (54.1 in)

Curb weight 1,410 kg (3,108.5 lb) (GT-T)

I'm in a fact slapping mood.... whats next?

v36 drivers duntrustem!

Edited by madbung

Oh you wanna play that game huh?

R32 gtr

Exterior Dimensions Base V-Spec Length [in. (cm)]: 178.9 (4,545) 178.9 (4,545) Width [in. (cm)]: 69.1 (1,755) 69.1 (1,755) Height [in. (cm)]: 52.8 (1,340) 53.3 (1,355) Wheelbase [in. (cm)]: 103.0 (2,615) 103.0 (2,615)

r33GTR

Exterior Dimensions Base V-Spec Length [in. (cm)]: 184.1 (4,675) 184.1 (4,675) Width [in. (cm)]: 70.1 (1,780) 70.1 (1,780) Height [in. (cm)]: 53.5 (1,360) 53.5 (1,360) Wheelbase [in. (cm)]: 107.1 (2,720) 107.1 (2,720)

R34 GTR

Exterior Dimensions Base V-Spec Length [in. (cm)]: 181.1 (4,600) 181.1 (4,600) Width [in. (cm)]: 70.3 (1,785) 70.3 (1,785) Height [in. (cm)]: 53.5 (1,360) 53.5 (1,360)

http://www.jbskyline.net/r32/gtr/specs/

http://www.jbskyline.net/r33/gtr/specs/

http://www.jbskyline.net/r34/gtr/specs/

This has gone way off topic

I was only discussing GTR models as the picture posted earlier were all gtr's but since you mentioned the r33gtst & r34gtt

I've owned both & the r33 was definitely longer

R33:

Exterior (L x W x H) 4640 x 1720 x 1340 (coupe) http://www.japanesesportcars.com/skyline/specs/r33_gts25tm.php

R34:

Exterior (L x W x H) 4580 x 1725 x 1340 (coupe) http://www.japanesesportcars.com/skyline/specs/r34_ggt_turbo.php

All those myths have been busted, r33 has better power to weight ratio than the 32 in all models. The only thing the 32 has more of is arse fat. The 34 in narrower, taller and longer than the 33 (how that = looks better dunno) its Lego block like dimensions are "too square"

Just look at the picture.... It has all the answers, it does not lie.

power to weight...

r32 gtr lighter than r33...

both have 206kw....

which would have better power to weight?

Op isn't talking about buying a gtr, he mentioned gtst & gtt

Try be ot It's a welcome thread ;)

The pic was for the box on wheels and Volvo jks ... That's how the boatpeople get some back.

Op isn't talking about buying a gtr, he mentioned gtst & gtt

Try be ot It's a welcome thread ;)

The pic was for the box on wheels and Volvo jks ... That's how the boatpeople get some back.

Try be ot It's a welcome thread ;)

The pic was for the box on wheels and Volvo jks ... That's how the boatpeople get some back.

The pic was for the box on wheels and Volvo jks ... That's how the boatpeople get some back.

That's how the boatpeople get some back.

That's how the boatpeople

the boatpeople

nizlM.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...