Jump to content
SAU Community

18" Enkei Rpf1 And Federals

?UESTLOVE
 Share

Recommended Posts

?UESTLOVE Rising Star

?UESTLOVE

Posted
Posted

Hey guys,

Im selling the Track wheels in favour of a different set.

Enkei RPF1

18 x 9.5 +15

18 x 10.5 +15

Federal 595-RSR

265/35/18

285/30/18

The wheels are a year old, and tyres are 2 months old.

Wheels have seen plenty of track time and on/off tyre fittings, but they are straight and no gutter damage. The black oaint on one wheel has been scratched by tyre fitting and when the car is strapped to the trailer.

Tyres have had 4 sessions at EC (WTAC 12) and are virtually new. Has seen maybe 500km max (Car is trailered to Wakefield track, but has been driven to EC/Workshop)

Clears big Supra brakes and GReddy 6 Pots

$2500

ENKEIRPF11of11_zps6b663467.jpg

ENKEIRPF12of11_zps18ab7483.jpg

ENKEIRPF13of11_zps7713717d.jpg

ENKEIRPF14of11_zps2f45a8b4.jpg

ENKEIRPF15of11_zpsf2becd3d.jpg

ENKEIRPF16of11_zps90be4e30.jpg

ENKEIRPF17of11_zpsba2cda32.jpg

ENKEIRPF18of11_zps53e53385.jpg

ENKEIRPF19of11_zps4d2b6ed4.jpg

ENKEIRPF110of11_zps8f0378b4.jpg

ENKEIRPF111of11_zps9aee86da.jpg

6880.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • nismo_au
      Sau A.c.t. - What Did You Do To Your Car Today?

      By nismo_au · Posted

      Cheers. 
    • XoRoKu
      R32 GTR fuel gauge not working despite fixing fuel level sender

      By XoRoKu · Posted

      Thanks, I checked from the back of the cluster and no reading there. I undid the connector and plugged in the wires directly to start from where I'm getting a reading: https://imgur.com/a/W8JI6Yr Weirdly enough when I tried to get a reading from the crimps that connect to the fuel pump assembly, I got nothing. Not sure what's my next step as I have admittedly limited knowledge with electricity. 
    • VooDoo34
      Sau A.c.t. - What Did You Do To Your Car Today?

      By VooDoo34 · Posted

      Looks clean as bro! very nice.
    • Neostead2000
      rb20de neo +t conversion - boost pressure sensor needed?

      By Neostead2000 · Posted

      Agreed with the rest. Also at least based on my own research, there are no readily available stock or close-to-stock RB20Neo maps that you could download and use as a base were you to buy a complete standalone ECU, and the regular 20DET maps don't really work well so you'd need to take it to a tuner if you have no experience. I installed an AEM V2 on my 20Neo+T and had lots of headaches until I got it to run and idle properly but I've yet to remap it fully. You have to start building up your timing and fuel maps entirely from the ground up; even the ones for a 25 didn't work at all.
    • klutched
      GOT SUM's RB34

      By klutched · Posted

      Got some decent progress after work yesterday and also today. Got the ECU all wired and passenger side interior all back together. Kept the wiring up nice and high to avoid people standing on it. Got the surge tank relays rewired and tidied up the pump wiring and cut a hole to bring the cables through.  I found a spare USB cable I had lying around so I decided to cut it up and see if I could use it for my CAN 1 bus. Turned out one of the pins I needed was to the shield of the cable so i cut it up and desoldered it and resoldered to the correct pins.  Had the issue with the powersteering hose hitting the A/C compressor and fan shroud. I pulled the bracket off and modified it to remove the front mounting point which now clears it all. Will keep an eye on it to see if theres any signs of fouling once it's up and running.
×
×
  • Create New...